Rear Panel; Serial Number - Classe Audio Sigma SSP Owner's Manual

serial number

14
11 12 10 4
15 16 9
100-240V~
T2AL250V
COAX 1 COAX 3
IN OUT
OUT IN
RS 232 CAN BUS IR
COAX 2 COAX OUT

Rear Panel

The rear panel of the Sigma SSP is shown above. The numbers in the drawing
refer to the descriptions in this section.
You'll find your SSP serial number adjacent to the AC Power Cord Input, as
shown in the graphic above. Please record this number for future reference.
And since you have found the serial number, please use it to register your
purchase, if you haven't done so yet. We may use the information to advise you
of any updates or other items of interest. Registration is simple, so please register
online at www.classeaudio.com or fill out the registration card and drop it in the
mail.
1 HDMI Inputs
The Sigma SSP supports seven HDMI inputs, labeled 1 to 7. The SSP is
HDMI v.1.4 enabled, supporting 2D and standard 3D video formats at
resolutions up to 1080p @ 24/50/60 fps, Audio Return Channel (ARC),
Deep Color and x.v.Color (xvYCC).
Various versions of HDMI are used to support the features and
connectivity for many different audio and video standards. The HDMI
1.4 version supports all of the audio formats that the Sigma SSP is capable
of decoding. The Sigma SSP does no scaling or video processing and
passes video through at its native resolution subject to the limits described
above. Should you require higher resolution (e.g. UHD 4K or 8K) video
throughput, use one of the source's HDMI outputs to connect it directly
to the display, connect the other to the SSP for audio decoding.
5 6 3 14
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING
OF THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED
AVIS! POUR RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE
LA FICHE CENTRALE DE LA PRISE DOIT ÊTRE 1 234567
BRANCHÉE POUR MAINTENIR LA MISE À LA TERRE
GND
DIGITAL I/O & CONTROL
OPT1 OPT2 USB ETHERNET
R1
8 7 1
HDMI IN
ANALOG AUDIO IN
L 2L 3
L1 R2 R3 FR
2 13
HDMI OUT
ANALOG AUDIO OUT
L C SL AUX 1
FL R S SR AUX 2