Firmware Update Via Network; Remote Fkeys - Classe Audio Sigma SSP Owner's Manual

The Sigma SSP includes a built-in web interface that can be used to configure
the system name, Network settings or update the SSP software. To access the
interface, type the IP address displayed on the Network Setup page in the
URL line of your browser (e.g. 192.168.1.0) and hit return. Alternately if you
are using Safari on the Mac, you can "Show All Bookmarks" (See: Bookmarks
menu) and click on Bonjour and double click on your Sigma SSP device listed
in the Webpage's folder.
On the web page: Status Information will show the System Name and the
Firmware Version number.
Configuration will allow you to personalize the system name and configure the
unit's IP address manually. It is strongly recommended to use DHCP rather than
attempt to assign a static IP address, but if one is required, an IT professional
should be involved in the installation.
Firmware Update
As an alternative to the standard USB stick method of updating the unit's
via Network
firmware, updates may be initiated from the Sigma SSP web interface page. First
go to the Software Downloads area of the Classé website and download the latest
firmware located in the Sigma SSP Update via LAN folder. Using the Firmware
tab on the SSP web page, confirm that the firmware version currently installed
is not the latest and click on the System restart button. Follow the prompts to
complete the update.

Remote Fkeys

The remote control supplied with the Sigma SSP has three function keys
(Fkeys), each of which can give you instant access to specific system functions.
For example, if you want direct access to particular sources or configurations,
you may want to consider programming some of the Fkeys to directly access
them. By assigning them as Fkey functions, you do not need to use the arrow
keys to scroll through the active sources or configurations looking for them.
The remote control F1 to F3 buttons correspond to the Function Keys displayed
on the touchscreen. Select the Function Key that you would like to assign, then
scroll through the list and choose the specific function you want that Fkey to
perform. Although the remote control is limited to three Fkeys, the Sigma SSP
can respond to as many as eight different Fkey commands. Certain other Classé
remote controls and aftermarket learning remotes are capable of utilizing these
additional commands.
43