Related Manuals for Classe Audio S-1000
Summary of Contents for Classe Audio S-1000
- Page 1 CLASSÉ AUDIO S-1000 ULTRA HIGH CURRENT STEREO/MONO POWER AMPLIIFER S-1000 OWNER'S MANUAL...
- Page 2 CLASSÉ DESIGN PHILOSOPHY 1. REPEATED LISTENING DESIGN SESSIONS: Fine tuning of sound by exchanging and mixing of parts (transistors, capacitors, wiring, PCB boards etc.), and adjusting many specific operating voltages within proper engineering ranges, producing an overall sonic recipe giving the most natural harmonic realism of music typical of instruments in a live performance.
-
Page 3: Table Of Contents
S-1000 OWNER'S MANUAL TABLE OF CONTENTS UNPACKING & SET-UP..............4 GENERAL CONNECTIONS............5 CONNECTIONS FOR REGULAR OR BALANCED INPUTS..7 WARRANTY ..................8 SPECIFICATIONS ................10 WARRANTY REGISTRATION............11... -
Page 4: Unpacking & Set-Up
3) Nut driver for CLASSÉ output bolts Please report any damage or missing parts to your dealer as soon as possible. Place the S-1000 at or near its final set-up position, allowing 8 inches at the rear for tightening the speaker output connectors. -
Page 5: General Connections
ALL INTERCONNECT CABLES BETWEEN THE ELECTRONICS BEFORE CONNECTING THE A.C. LINECORDS TO THE WALL OUTLETS. THIS WILL REDUCE THE POTENTIAL SHOCK HAZARD. SEE ALSO THE S-1000 WARRANTY SECTION OF THIS OWNER'S MANUAL. STEREO Check the setting on the STEREO/MONO toggle switch, located above the input jacks on the back of the unit. - Page 6 The output connections are marked BELOW the connectors. (The MONO positive is the left positive; the MONO negative is the right positive.) Repeat the above MONO settings and connections on the second S-1000 to be used for the other channel.
-
Page 7: Connections For Regular Or Balanced Inputs
The amplifier is factory set for use. Connect the regular interconnects to the input REGULAR jacks on the rear panel of the S-1000, and make sure the toggle switch lever is closest to the position marked . (The input connectors are automatically disable.). -
Page 8: Warranty
CLASSÉ S-1000 LIMITED FACTORY WARRANTY (North America only). Classé Audio Inc. warrants this amplifier to be free from defects in materials and workmanship for a period of from the date of manufacture, provided that any claim in FOUR YEARS virtue of this warranty be made in writing within such period. - Page 9 CLASSÉ AUDIO INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM OR RELATING TO THE SET-UP, OPERATION, FAILURE, TROUBLESHOOTING, OR REPAIR OF THE AMPLIFIER AND/OR ANY OTHER EQUIPMENT USED THEREWITH. THIS WARRANTY, ALL CLAIMS MADE IN VIRTUE HEREOF, AND ALL ISSUES RELATING TO ANY SUCH CLAIM SHALL BE GOVERNED BY THE LAWS OF THE PROVINCE OF QUÉBEC.
-
Page 10: Specifications
CLASSÉ S-1000 ULTRA HIGH CURRENT STEREO/MONO POWER AMPLIFIER FEATURES SPECIFICATIONS SHEET S-1000 FEATURES: Newly developed special Classé 'UHC TRANSFER' power supply section. Current capacity increased 250% above standard units. Magnetic flux controlled transformer cover in a brushed and anodized finish. All new Classé PCB circuit boards with 'UHC TRANSFER' characteristics. -
Page 11: Warranty Registration
(20) days of purchase. This will allow us to provide expedient service, information regarding updates and new products, and validate the Classé warranty. ||||||||||||||||||||||||||||||||||||||| S-1000 SERIAL NUMBER_____________________PURCHASE DATE_____________________ AUTHORIZED DEALER________________________________________________________ PURCHASER'S NAME_________________________________________________________ STREET ADDRESS____________________________________________________________ CITY________________________________STATE/PROV.____________________________...