Rack-Mounting The Sigma Ssp - Classe Audio Sigma SSP Owner's Manual

Rack-Mounting the
The Sigma SSP is designed to accommodate rack-mount installation. Professional
Sigma SSP
installation by an authorized Classe dealer is recommended.
To rack mount the SSP, remove the two side-panel screws, rotate and flip the side
panel to position the rack "ear" along the front of the SSP and re-install the side-
panel screws. Repeat for the side panel on the opposite side. Remove the feet from
the bottom of the SSP.
Carefully install the SSP into the equipment rack using the appropriate screws
for the type of rack. It is easiest if two people perform the installation to avoid
the possibility of dropping the SSP or otherwise causing damage. Please allow for
adequate ventilation, usually two rack spaces above the SSP will suffice.
Magnetically secured rack ear covers, provided in the accessory pack, may be used
to cover the screws and finish off the appearance.
9