The Menu System; System Setup - Classe Audio Sigma SSP Owner's Manual

The Menu System

The comprehensive menu system provides setup and configuration controls for
the Sigma SSP. These installation-specific features let you customize how the SSP
works within the context of your particular system. Changes are made on-the-fly,
which allows you to quickly set up and modify settings without constantly being
asked if you're sure you want to make the change and pressing enter to save. The
SSP stores settings in non-volatile memory whenever it is put into standby, so
it's a good practice to put the unit into standby after making changes. In normal
daily operation this happens anyway, but if you want to be sure a loss of power
doesn't erase your changes, putting the SSP into standby will give you extra
assurance.
Pressing the Menu button on the front panel (or if an Fkey on the remote
control has been programmed to perform the Menu command) will open the
main Menu page, which is divided into six sections as shown below.
At the top right of the menu pages you may find a button which uses the
arrow icon when additional menu options are available, and/or a Home button
for returning to the Home page. When on the main Menu page, pressing the
Menu button returns to the Home page. If you are on a page within the Menu
System, pressing the Menu button returns you to the main Menu page. When
you navigate beyond the main Menu page a return or back button using the
icon appears on the upper left corner of the page. This returns you to the
previous page.

System Setup

Touching the System Setup button on the main Menu page opens the System
Setup page, which contains ten setup options, the first nine of which are shown
below, with Teach IR located on the next page.
33