Figure B-22: Auto Recovery Utility; Figure B-23: Disable Automatically Restart - IEI Technology KINO-DQM871 User Manual

Step 1: Follow the steps described in Section B.2.1 ~ Section B.2.3 to setup BIOS,
create partitions and install operating system.
Step 2: Install the auto recovery utility into the system by double clicking the
Utility/AUTORECOVERY-SETUP.exe in the One Key Recovery CD. This utility
MUST be installed in the system, otherwise, the system will automatically
restore from the factory default image every ten (10) minutes.

Figure B-22: Auto Recovery Utility

Step 3: Disable the automatically restart function before creating the factory
default image. Go to: My Computer
Settings button of Startup and Recovery. Deselect "Automatically restart". Click
OK to save the settings and exit. (See Figure B-23)

Figure B-23: Disable Automatically Restart

Page 162
KINO-DQM871 Mini-ITX SBC
Properties Advanced. Click the