Page 1 KINO-9455 Mini-ITX CPU Card Page i...
Page 2 KINO-9455 Mini-ITX CPU Card Revision Date Version Changes 2008-01-11 1.02 Changed the front panel audio description 2007-12-03 1.01 Removed options from BIOS PCIPnP 2007-08-06 1.00 Initial release Page ii...
Page 3 KINO-9455 Mini-ITX CPU Card Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Page 4 Cautionary messages should also be heeded to help reduce the chance of losing data or damaging the KINO-9455. Cautions are easy to recognize. The word “caution” is written as “CAUTION,” both capitalized and bold and is followed. The italicized text is the cautionary message.
Page 5 KINO-9455 Mini-ITX CPU Card CAUTION: This is an example of a caution message. Failure to adhere to cautions messages may result in permanent damage to the KINO-9455. Please take caution messages seriously. NOTE: These messages inform the reader of essential but non-critical information. These messages should be read carefully as any directions or instructions contained therein can help avoid making mistakes.
Page 6 KINO-9455 from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw. The items listed below should all be included in the KINO-9455 package. 1 x KINO-9455 Single Board Computer 1 x Dual RS-232 Cable...
Page 7: Table Of Contents
1.1.1 KINO-9455 Benefits................... 2 1.1.2 KINO-9455 Features..................3 1.2 KINO-9455 O ..................... 4 VERVIEW 1.2.1 KINO-9455 Overview Photo................4 1.2.2 KINO-9455 Peripheral Connectors and Jumpers ..........5 1.2.3 Technical Specifications..................6 DETAILED SPECIFICATIONS ................9 2.1 O ....................... 10 VERVIEW 2.2 D...
Page 8 KINO-9455 Mini-ITX CPU Card ® 2.6.6 Intel ICH7-M Real Time Clock ..............23 ® 2.6.7 Intel ICH7-M SATA Controller ..............23 ® 2.6.8 Intel ICH7-M PCIe x1 Bus: PCIe GbE Controller ........23 ® 2.6.9 Intel ICH7-M USB Controller................ 24 2.7 LPC B...
Page 9 KINO-9455 Mini-ITX CPU Card 4.2.3 Backlight Inverter Connector ................44 4.2.4 Battery Connector.................... 45 4.2.5 Digital Input/Output (DIO) Connector............46 4.2.6 Fan Connector (+12V, 3-pin) ................47 4.2.7 Front Panel Connector (14-pin) ..............48 4.2.8 IDE Connector (40-pin)................... 49 4.2.9 LVDS LCD Connector ..................51 4.2.10 Mini PCI Slot ....................
Page 10 KINO-9455 Mini-ITX CPU Card 5.4.2 LVDS Voltage Selection..................88 5.4.3 RS-232/RS-422 or RS-485 Serial Port Select Jumper ........89 5.5 C ................... 90 HASSIS NSTALLATION 5.5.1 Airflow......................90 5.5.2 Motherboard Installation................. 91 5.6 I ............91 NTERNAL ERIPHERAL EVICE ONNECTIONS 5.6.1 Peripheral Device Cables ................
Page 11 KINO-9455 Mini-ITX CPU Card 6.3.7 Remote Access Configuration ................ 130 6.3.8 USB Configuration..................134 6.3.8.1 USB Mass Storage Device Configuration ..........137 6.4 PCI/P P ........................ 139 6.5 B ........................142 6.5.1 Boot Settings Configuration................142 6.5.2 Boot Device Priority ..................145 6.5.3 Hard Disk Drives ...................
Page 12 KINO-9455 Mini-ITX CPU Card ADDRESS MAPPING..................202 E.1 A ....................... 203 DDRESS E.2 1 MB M ................203 EMORY DDRESS E.3 IRQ M .................... 204 APPING ABLE E.4 DMA C ................204 HANNEL SSIGNMENTS HAZARDOUS MATERIALS DISCLOSURE ........... 206 F.1 H...
Page 13 KINO-9455 Mini-ITX CPU Card List of Figures Figure 1-1: KINO-9455 Overview [Front View] ................4 Figure 2-1: KINO-9455 Dimensions (mm)...................10 Figure 2-2: External Interface Panel Dimensions (mm) ............11 Figure 2-3: Data Flow Block Diagram ..................12 Figure 2-4: Socket M........................13 Figure 2-5: Socket M........................14 Figure 2-6: 240-pin DDR2 DIMM Sockets ...................15...
Page 14 Figure 4-15: COM3 and COM4 Connector Pinout Locations ...........63 Figure 4-16: SPDIF Connector Pinout Locations ..............64 Figure 4-17: USB Connector Pinout Locations .................65 Figure 4-18: KINO-9455 External Peripheral Interface Connector...........66 Figure 4-19: Audio Connector .....................67 Figure 4-20: PS/2 Pinouts ......................68 Figure 4-21: RJ-45 Ethernet Connector..................69...
Page 15 KINO-9455 Mini-ITX CPU Card Figure 7-1: Introduction Screen ....................164 Figure 7-2: Available Drivers ....................165 Figure 7-3: Chipset Driver Installation Program..............166 Figure 7-4: Chipset Driver Installation Welcome Screen............166 Figure 7-5: Chipset Driver Installation License Agreement ..........167 Figure 7-6: Chipset Driver Readme File Information .............
Page 16 KINO-9455 Mini-ITX CPU Card List of Tables Table 1-1: Technical Specifications ....................7 Table 2-1: Supported HDD Specifications..................21 Table 2-2: Power Consumption ....................32 Table 3-1: Package List Contents....................36 Table 4-1: Peripheral Interface Connectors ................40 Table 4-2: Rear Panel Connectors ....................40 Table 4-3: ATX Power Connector Pinouts ..................42 Table 4-4: Audio Connector Pinouts (9-pin)................44...
Page 17 KINO-9455 Mini-ITX CPU Card Table 5-3: LVDS Voltage Selection Jumper Settings..............89 Table 5-4: RS-232/485 Serial Port Select Jumper Settings............90 Table 5-5: IEI Provided Cables ....................91 Table 6-1: BIOS Navigation Keys ..................... 106 Page xvii...
Page 18 KINO-9455 Mini-ITX CPU Card BIOS Menus Menu 1: Main ..........................107 Menu 2: Advanced ........................109 Menu 3: CPU Configuration.......................110 Menu 4: IDE Configuration ......................111 Menu 5: IDE Master and IDE Slave Configuration..............113 Menu 6: Super IO Configuration ....................118 Menu 7: Hardware Health Configuration ................. 122 Menu 8: ACPI Configuration .....................
Page 19: Introduction
KINO-9455 Mini-ITX CPU Card Chapter Introduction Page 1...
Page 20: Introduction
KINO-9455 Mini-ITX CPU Card 1.1 Introduction The KINO-9455 Socket M CPU card supports Intel® Core™2 Duo, Intel® Core™ Duo and Intel® Core™ Solo processors with a 667MHz Front Side Bus (FSB) and Intel® Celeron M with a 533MHz FSB. The KINO-9455 can support two dual channel DDR2 memory modules of up to 2GB each.
Page 21: Kino-9455 Features
KINO-9455 Mini-ITX CPU Card 1.1.2 KINO-9455 Features Some of the KINO-9455 features include. RoHS compliant PICMG 1.0 compliant Supports Intel® Core™2, Intel® Core™ and Intel® Celeron M processors Maximum FSB 667MHz Maximum of 4GB of 400MHz, 533MHz or 667MHz dual-channel memory from two 240-pin DDR2 memory slots Two SATA drives with transfer rates of 1.5Gbps...
Page 22: Kino-9455 Overview
1.2.1 KINO-9455 Overview Photo The KINO-9455 has a wide variety of internal and external peripheral connectors. A labeled photo of the peripheral connectors on the front of the KINO-9455 is shown in Figure 1-1. Figure 1-1: KINO-9455 Overview [Front View]...
Page 23: Kino-9455 Peripheral Connectors And Jumpers
2 x SATA connectors 3 x Serial port connectors 1 x System fan header 2 x USB header The KINO-9455 has the following external peripheral interface connectors on the board rear panel 1 x Audio ports 2 x Ethernet connectors...
Page 24: Technical Specifications
KINO-9455 Mini-ITX CPU Card 1.2.3 Technical Specifications KINO-9455 technical specifications are listed in Table 1-1. See Chapter 2 for details. Specification KINO-9455 Form Factor Mini-ITX Intel® Core™2 Duo Intel® Core™ Duo System CPU Intel® Core™ Solo Intel® Celeron M (533MHz FSB, Yonah Core)
Page 25: Table 1-1: Technical Specifications
KINO-9455 Mini-ITX CPU Card Specification KINO-9455 CPU / System fan speed detection CPU smart fan control ITE IT8712F Super I/O One 40-pin IDE connector One external PS/2 connector for keyboard Keyboard/mouse One external PS/2 connector for mouse Two 240-pin DIMM sockets support two dual channel...
Page 26 KINO-9455 Mini-ITX CPU Card THIS PAGE IS INTENTIONALLY LEFT BLANK Page 8...
Page 27: Detailed Specifications
KINO-9455 Mini-ITX CPU Card Chapter Detailed Specifications Page 9...
Page 28: Overview
KINO-9455 Mini-ITX CPU Card 2.1 Overview This chapter describes the specifications and on-board features of the KINO-9455 in detail. 2.2 Dimensions 2.2.1 Board Dimensions The dimensions of the board are listed below: Length: 170mm Width: 170mm Figure 2-1: KINO-9455 Dimensions (mm)
Page 29: External Interface Panel Dimensions
KINO-9455 Mini-ITX CPU Card 2.2.2 External Interface Panel Dimensions External peripheral interface connector panel dimensions are shown in Figure 2-2. Figure 2-2: External Interface Panel Dimensions (mm) Page 11...
Page 30: Data Flow
KINO-9455 Mini-ITX CPU Card 2.3 Data Flow Figure 2-3 shows the data flow between the two on-board chipsets and other components installed on the motherboard and described in the following sections of this chapter. Figure 2-3: Data Flow Block Diagram...
Page 31: Compatible Processors
KINO-9455 Mini-ITX CPU Card 2.4 Compatible Processors 2.4.1 Compatible Processor Overview The KINO-9455 supports the following socket M processors: Intel® Core™ 2 Duo Intel® Core™ Duo/Solo Intel® Celeron M (533MHz FSB, Yonah Core) Figure 2-4: Socket M All the above processors communicate with the Intel® 945GM Northbridge chipset through a 533MHz or 667MHz FSB.
Page 32: Intel ® 945Gm Northbridge Chipset
KINO-9455 Mini-ITX CPU Card ® 2.5 Intel 945GM Northbridge Chipset ® 2.5.1 Intel 945GM Overview The Intel® 945GM Northbridge chipset has the Generation 3.1 Intel Integrated Graphics Engine and the Intel® Graphics Media Accelerator 950 (Intel® GMA 950). The graphics...
Page 33: Intel ® 945Gm Memory Support
® 2.5.2 Intel 945GM Memory Support WARNING: Only DDR2 memory modules can be installed on the KINO-9455. Do not install DDR memory modules. If a DDR memory module is installed on the KINO-9455, the KINO-9455 may be irreparably damaged. ®...
Page 34: Intel ® 945Gm Integrated Graphics
KINO-9455 Mini-ITX CPU Card ® 2.5.3 Intel 945GM Integrated Graphics The Intel® 945GM Northbridge chipset has an Intel® Gen. 3.5 integrated graphics engine that supports the following display devices: TV-Out LVDS Figure 2-7: TV Out, VGA and LVDS ® 2.5.3.1 Intel...
Page 35: Chrontel Ch7308A Lvds Support
KINO-9455 Mini-ITX CPU Card Overscaling NTSC and PAL formats supported Supports RCA or S-VIDEO connectivity Supports HDTV with the following resolutions: 480p 720p 1080i 1080p 2.5.3.3 Chrontel CH7308A LVDS Support A 30-pin LVDS crimp connector is connected to the Chrontel CH7308A chipset, which is connected to the Intel®...
Page 36: Intel ® Ich7-M Southbridge Chipset
KINO-9455 Mini-ITX CPU Card Figure 2-8: DMI Interface ® Features of the Intel 945GM DMI are listed below: 2GB/s (1GB/s in each direction) bus speed 32-bit downstream address ® 2.6 Intel ICH7-M Southbridge Chipset ® 2.6.1 Intel ICH7-M Overview The Intel® ICH7-M Southbridge chipset is connected to the Intel® 945GM Northbridge GMCH through the chip-to-chip Direct Media Interface (DMI).
Page 37 Integrated SATA host controller with DMA operations interfaced to two SATA connectors on the KINO-9455 Integrated IDE controller supports Ultra ATA 100/66/33 Supports the eight USB 2.0 devices on the KINO-9455 with four UHCI controllers and one EHCI controller Complies with System Management Bus (SMBus) Specification, Version 2.0 Supports Audio Codec ’97 (AC’97) Revision 2.3...
Page 38: Intel ® Ich7-M Hd Audio Controller
KINO-9455 Mini-ITX CPU Card ® 2.6.2 Intel ICH7-M HD Audio Controller The HD Audio controller integrated into the ICH7-M complies with the Intel High Definition Audio specification. Figure 2-9: HD Audio Codec The HD audio controller is connected to the external peripheral interface controllers through the integrated ALC883 HD Audio Codec.
Page 39: Intel ® Ich7-M Ide Interface
KINO-9455 Mini-ITX CPU Card ® 2.6.3 Intel ICH7-M IDE Interface The integrated IDE interface on the ICH7-M Northbridge supports two IDE hard disks and ATAPI devices. PIO IDE transfers up to 16MB/s and Ultra ATA transfers of 100MB/s. Figure 2-10: IDE Interface...
Page 40: Intel ® Ich7-M Low Pin Count (Lpc) Interface
KINO-9455 Mini-ITX CPU Card ® 2.6.4 Intel ICH7-M Low Pin Count (LPC) Interface The ICH7-M LPC interface complies with the LPC 1.1 specifications. The LPC bus from the ICH6 is connected to the following components: BIOS chipset Super I/O chipset Fintek F81216D Serial Port Chipset ®...
Page 41: Intel ® Ich7-M Real Time Clock
® 2.6.7 Intel ICH7-M SATA Controller The integrated SATA controller on the ICH7-M Southbridge supports two SATA drives on the KINO-9455 with independent DMA operations. Figure 2-12: SATA Controller SATA controller specifications are listed below. Supports two SATA drives Supports 1.5Gb/s data transfer speeds Supports Serial ATA Specification, Revision 1.0a...
Page 42: Intel ® Ich7-M Usb Controller
ICH7-M USB Controller Up to eight high-speed, full-speed or low-speed USB devices are supported by the ICH7-M on the KINO-9455. High-speed USB 2.0, with data transfers of up to 480MB/s, is enabled with the ICH7-M integrated Enhanced Host Controller Interface (EHCI) compliant host controller.
Page 43: Lpc Bus Components
KINO-9455 Mini-ITX CPU Card Figure 2-14: Onboard USB Implementation 2.7 LPC Bus Components 2.7.1 LPC Bus Overview The LPC bus is connected to components listed below: BIOS chipset Super I/O chipset Fintek F81216D serial port chipset Page 25...
Page 44: Bios Chipset
KINO-9455 Mini-ITX CPU Card Figure 2-15: LPC Interface 2.7.2 BIOS Chipset The BIOS chipset has a licensed copy of AMI BIOS installed on the chipset. Figure 2-16: BIOS Chipset Page 26...
Page 45: Fintek F81216D Lpc Serial Port Chipset
KINO-9455 Mini-ITX CPU Card Some of the BIOS features are listed below: AMI Flash BIOS SMIBIOS (DMI) compliant Console redirection function support PXE (Pre-boot Execution Environment) support USB booting support 2.7.3 Fintek F81216D LPC Serial Port Chipset The Fintek F81216D chipset enables the addition of four additional UART serial ports of which two are implemented (COM3 and COM4).
Page 46: Ite It8712F Super I/O Chipset
KINO-9455 Mini-ITX CPU Card Powered by 3Vcc 2.7.4 iTE IT8712F Super I/O chipset The iTE IT8712F Super I/O chipset is connected to the ICH7-M Southbridge through the LPC bus. The iTE IT8712F is an LPC interface-based Super I/O device that comes with Environment Controller integration.
Page 47: Super I/O Lpc Interface
KINO-9455 Mini-ITX CPU Card Single +5V Power Supply Some of the Super I/O features are described in more detail below: 2.7.4.1 Super I/O LPC Interface ® The LPC interface on the Super I/O complies with the Intel Low Pin Count Specification Rev.
Page 48: Super I/O Keyboard/Mouse Controller
Three thermal inputs on the KINO-9455 Super I/O Enhanced Hardware Monitor monitor the following temperatures: System temperature Power temperature CPU temperature Ten voltage inputs on the KINO-9455 Super I/O Enhanced Hardware Monitor monitor the following voltages: Vcore +2.5V +3.3V +5.0V +12.0V...
Page 49: Operating Temperature And Temperature Control
KINO-9455 Mini-ITX CPU Card The KINO-9455 Super I/O Enhanced Hardware Monitor also monitors the following fan speeds: CPU Fan speed System Fan speed The values for the above environmental parameters are all recorded in the BIOS Hardware Health Configuration menu.
Page 50: Power Consumption
KINO-9455 Mini-ITX CPU Card 2.8.3 Power Consumption Table 2-2 shows the power consumption parameters for the KINO-9455 running with an Intel® Core® 2 Duo 2.16GHz processor and 2 x 1GB DDR2 SDRAM. Voltage Current 3.3V 3.12A 5VSB 0.32A 1.58A 2.05A...
Page 51: Unpacking
KINO-9455 Mini-ITX CPU Card Chapter Unpacking Page 33...
Page 52: Anti-Static Precautions
When the KINO-9455 is unpacked, please do the following: Follow the anti-static precautions outlined in Section 3.1. Make sure the packing box is facing upwards so the KINO-9455 does not fall out of the box. Make sure all the components shown in Section 3.3 are present.
Page 53: Unpacking Checklist
If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the KINO-9455 was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw.
Page 54: Table 3-1: Package List Contents
KINO-9455 Mini-ITX CPU Card SATA cable (P/N: 32000-062800-RS) SATA power cable (P/N: 32100-088600-RS) Mini jumper pack Quick Installation Guide Utility CD Table 3-1: Package List Contents Page 36...
Page 55: Connector Pinouts
KINO-9455 Mini-ITX CPU Card Chapter Connector Pinouts Page 37...
Page 56: Peripheral Interface Connectors
KINO-9455 Mini-ITX CPU Card 4.1 Peripheral Interface Connectors Section 4.1.1 shows peripheral interface connector locations. Section 4.1.2 lists all the peripheral interface connectors. 4.1.1 KINO-9455 Layout Figure 4-1 shows the on-board peripheral connectors, rear panel peripheral connectors and on-board jumpers.
Page 57: Peripheral Interface Connectors
KINO-9455 Mini-ITX CPU Card 4.1.2 Peripheral Interface Connectors Table 4-1 shows a list of the peripheral interface connectors on the KINO-9455. Detailed descriptions of these connectors can be found below. Connector Type Label ATX power supply connector 20-pin ATX connector...
Page 58: External Interface Panel Connectors
8-pin header USB4 USB connector 8-pin header USB5 Table 4-1: Peripheral Interface Connectors 4.1.3 External Interface Panel Connectors Table 4-2 lists the rear panel connectors on the KINO-9455. Connector Type Label Dual USB port USB port LAN/USB1 Dual USB port...
Page 59: Internal Peripheral Connectors
Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. This section has complete descriptions of all the internal, peripheral connectors on the KINO-9455. 4.2.1 ATX Power Connector CN Label:...
Page 60: Audio Connector (9-Pin)
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION PS-ON PW-OK +VCC5SB FP22 Table 4-3: ATX Power Connector Pinouts 4.2.2 Audio Connector (9-pin) CN Label: AUDIO2 CN Type: 9-pin header (2x5) CN Location: See Figure 4-3 CN Pinouts: See Table 4-4 The 9-pin audio connector is connected to the system’s front panel audio module.
Page 61 KINO-9455 Mini-ITX CPU Card Page 43...
Page 62: Backlight Inverter Connector
6-pin wafer (1x6) CN Location: See Figure 4-4 See Table 4-5 CN Pinouts: The backlight inverter connector provides the backlight on the LCD display connected to the KINO-9455 with +12V of power. Figure 4-4: Panel Backlight Connector Pinout Locations Page 44...
Page 63: Battery Connector
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION +12V +12V BACKLIGHT ENABLE GROUND GROUND Table 4-5: Panel Backlight Connector Pinouts 4.2.4 Battery Connector CN Label: BAT1 CN Type: 2-pin wafer (1x2) CN Location: See Figure 4-5 See Table 4-6 CN Pinouts: The battery connector is connected to a backup battery.
Page 64: Digital Input/Output (Dio) Connector
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION Battery+ Ground Table 4-6: Battery Connector Pinouts 4.2.5 Digital Input/Output (DIO) Connector CN Label: DIO1 CN Type: 10-pin header (2x5) See Figure 4-6 CN Location: CN Pinouts: See Table 4-7 The digital input/output connector is managed through a Super I/O chip. The DIO connector pins are user programmable.
Page 65: Fan Connector (+12V, 3-Pin)
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION Input 2 Output 2 Input 3 Output 3 Table 4-7: DIO Connector Connector Pinouts 4.2.6 Fan Connector (+12V, 3-pin) CN Label: CPU_FAN1, NB_FAN1, SYS_FAN1 CN Type: 3-pin wafer See Figure 4-7...
Page 66: Front Panel Connector (14-Pin)
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION Fan Speed Detect +12V Table 4-8: +12V Fan Connector Pinouts 4.2.7 Front Panel Connector (14-pin) F_PANEL1 CN Label: CN Type: 14-pin header (2x7) CN Location: See Figure 4-8 CN Pinouts: See Table 4-9 The front panel connector connects to external switches and indicators to monitor and control the motherboard.
Page 67: Ide Connector (40-Pin)
KINO-9455 Mini-ITX CPU Card Figure 4-8: Front Panel Connector Pinout Locations FUNCTION DESCRIPTION FUNCTION DESCRIPTION Power LED Speaker Ground Power Button PWRBTN Speaker Reset HDD LED Reset- HDD LED Table 4-9: Front Panel Connector Pinouts 4.2.8 IDE Connector (40-pin) CN Label:...
Page 68: Figure 4-9: Ide Device Connector Locations
KINO-9455 Mini-ITX CPU Card One 40-pin IDE device connector on the KINO-9455 supports connectivity to two hard disk drives. Figure 4-9: IDE Device Connector Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION RESET# GROUND DATA 7 DATA 8 DATA 6 DATA 9...
Page 69: Lvds Lcd Connector
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION DATA 4 DATA 11 DATA 3 DATA 12 DATA 2 DATA 13 DATA 1 DATA 14 DATA 0 DATA 15 GROUND IDE DRQ GROUND IOW# GROUND IOR# GROUND IDE CHRDY...
Page 70: Figure 4-10: Lvds Lcd Connector Pinout Locations
KINO-9455 Mini-ITX CPU Card Figure 4-10: LVDS LCD Connector Pinout Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION GROUND GROUND LVDS_A0+ LVDS_A0- LVDS_A1+ LVDS_A1- LVDS_A2+ LVDS_A2- LVDS1_CLK+ LVDS1_CLK- LVDS_A3+ LVDS_A3- GROUND GROUND LVDS_A4+ LVDS_A4- LVDS_A5+ LVDS_A5- LVDS_A6+ LVDS_A6- LVDS1_CLK+ LVDS1_CLK- LVDS_A7+...
Page 71: Mini Pci Slot
KINO-9455 Mini-ITX CPU Card 4.2.10 Mini PCI Slot CN Label: MINIPCI 124-pin Mini PCI Type III Slot CN Type: CN Location: See Figure 4-12 CN Pinouts: See Table 4-13 The Mini PCI slot enables a Mini PCI expansion module to be connected to the board.
Page 72: Figure 4-11: Mini Pci Slot Location
KINO-9455 Mini-ITX CPU Card Figure 4-11: Mini PCI Slot Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION Page 54...
Page 73 KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION PINTD# VCC5 VCC3 PINTC# VCC3SB CLK_MPCI PCI_RST1# VCC3 PCI_REQ2# PCI_GNT2# VCC3 PAD31 PPME# PAD29 PAD30 PAD27 VCC3 PAD25 PAD28 PAD26 PC/BE3# PAD24 PAD23 PAD29 PAD21 PAD22 PAD19 PAD20 PPAR PAD17...
Page 74 KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION PIRDY# VCC3 PFRAME# PTRDY# SERR# PSTOP# VCC3 PERR# PDEVSEL# PC/BE1# PAD14 PAD15 PAD13 PAD12 PAD11 PAD10 PAD9 PAD8 PC/BE0# PAD7 VCC3 VCC3 PAD6 PAD5 PAD4 PAD2 PAD3 PAD0 VCC5 PAD1...
Page 75: Pci Slot
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC3SB Table 4-12: Mini PCI Slot Pinouts 4.2.11 PCI Slot CN Label: PCI2 CN Type: PCI Slot CN Location: See Figure 4-12 See Table 4-13 CN Pinouts: The PCI slot enables a PCI expansion module to be connected to the board.
Page 76: Figure 4-12: Pci Slot Location
KINO-9455 Mini-ITX CPU Card Figure 4-12: PCI Slot Location Page 58...
Page 77 KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION TRST -12V +12V INTA INTC INTB INTD RESERVED3 PRSNT1 RESERVED1 RESERVED4 PRSNT2 3.3V_AUX RESERVED2 AD30 AD31 +3.3V AD29 AD28 AD26 AD27 AD25 AD24 +3.3V IDSEL C/BE3 +3.3V AD23 AD22 AD20...
Page 78: Table 4-13: Pci Slot
KINO-9455 Mini-ITX CPU Card AD16 AD17 +3.3V C/BE2 FRAME IRDY TRDY +3.3V DEVSEL STOP +3.3V LOCK SDONE PERR +3.3V SERR +3.3V AD15 C/BE1 +3.3V AD14 AD13 AD11 AD12 AD10 C/BE0 +3.3V +3.3V REQ64 ACK64 Table 4-13: PCI Slot Page 60...
Page 79: Sata Drive Connectors
KINO-9455 Mini-ITX CPU Card 4.2.12 SATA Drive Connectors CN Label: SATA1 and SATA2 7-pin SATA drive connectors CN Type: CN Location: See Figure 4-13 CN Pinouts: See Table 4-14 The two SATA drive connectors can each be connected to a SATA drive. SATA drives transfer data at speeds as high as 150Mbps.
Page 80: Serial Port Connector (Com 2)(Rs-232, Rs-422 Or Rs-485)
KINO-9455 Mini-ITX CPU Card 4.2.13 Serial Port Connector (COM 2)(RS-232, RS-422 or RS-485) CN Label: COM2 14-pin header (2x7) CN Type: CN Location: See Figure 4-14 CN Pinouts: See Table 4-15 The 14-pin serial port connector connects to the COM 2 serial communications channels.
Page 81: Serial Port Connector (Com 3 And Com4)
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION Table 4-15: RS-232/RS-485 Serial Port Connector Pinouts 4.2.14 Serial Port Connector (COM 3 and COM4) CN Label: COM3 and COM4 CN Type: 10-pin header (2x5) See Figure 4-15 CN Location:...
Page 82: Spdif Connector
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION Data Terminal Ready (DTR) Ring Indicator (RI) Ground (GND) Ground (GND) Table 4-16: COM3 and COM4 Connector Pinouts 4.2.15 SPDIF Connector CN Label: SPDIF1 5-pin header CN Type: CN Location:...
Page 83: Usb Connectors (Internal)
KINO-9455 Mini-ITX CPU Card DESCRIPTION VCC AUDIO SPDIF OUT GND AUDIO SPDIF IN Table 4-17: SPDIF Connector Pinouts 4.2.16 USB Connectors (Internal) USB4 and USB5 CN Label: CN Type: 8-pin header (2x4) CN Location: See Figure 4-17 See Table 4-18 CN Pinouts: The 2x4 USB pin connectors each provide connectivity to two USB 1.1 or two USB 2.0...
Page 84: External Peripheral Interface Connector Panel
DATAM+ Table 4-18: USB Port Connector Pinouts 4.3 External Peripheral Interface Connector Panel Figure 4-18 shows the KINO-9455 external peripheral interface connector (EPIC) panel. The KINO-9455 EPIC panel consists of the following: 6 x Audio jack connectors 2 x RJ-45 LAN connectors...
Page 85: Audio Connector
CN Location: See Figure 4-18 The three audio jacks on the external audio connector enable the KINO-9455 to be connected to external audio devices as specified below. Line In port (Light Blue): Connects a CD-ROM, DVD player, or other audio devices.
Page 86: Lan Connectors
CN Pinouts: See Table 4-20 The KINO-9455 is equipped with two built-in RJ-45 Ethernet controllers. The controllers can connect to the LAN through two RJ-45 LAN connectors. There are two LEDs on the connector indicating the status of LAN. The pin assignments are listed in the following...
Page 87: Serial Port Connectors (Com1 )
KINO-9455 Mini-ITX CPU Card DESCRIPTION DESCRIPTION TXA+ TXC- TXA- TXB- TXB+ TXD+ TXC+ TXD- Table 4-20: LAN Pinouts Figure 4-21: RJ-45 Ethernet Connector The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green LED indicates activity on the port and the yellow LED indicates the port is linked. See Table 4-21.
Page 88: Usb Connector
CN Label: LAN/USB1 and LAN/USB2 CN Type: USB ports CN Location: See Figure 4-18 CN Pinouts: See Table 4-23 The KINO-9455 has four external USB 2.0 ports. The ports connect to both USB 2.0 and USB 1.1 devices. Page 70...
Page 89: Tv Connector
KINO-9455 Mini-ITX CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION USBV3L 5V USBP4N USBP5P USBP4P USBP5N USBV3L 5V Table 4-23: USB Port Pinouts 4.3.6 TV Connector CN Label: CN Type: 7-pin Mini-DIN CN Location: See Figure 4-18 CN Pinouts: See Table 4-24 A 7-pin mini DIN connector (TV1) is located on the mounting bracket for easy connection to a TV OUT cable.
Page 90: Vga Connector
CRT_COM1 15-pin Female CN Type: CN Location: See Figure 4-18 CN Pinouts: See Figure 4-23 and Table 4-25 The KINO-9455 has a single 15-pin female connector for connectivity to standard display devices. Figure 4-23: VGA Connector DESCRIPTION DESCRIPTION GREEN BLUE...
Page 91 KINO-9455 Mini-ITX CPU Card THIS PAGE IS INTENTIONALLY LEFT BLANK Page 73...
Page 92: Installation
KINO-9455 Mini-ITX CPU Card Chapter Installation Page 74...
Page 93: Anti-Static Precautions
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the KINO-9455. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the KINO-9455, or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
Page 94: Installation Considerations
KINO-9455 is installed. All installation notices pertaining to the installation of the KINO-9455 should be strictly adhered to. Failing to adhere to these precautions may lead to severe damage of the KINO-9455 and injury to the person installing the motherboard. 5.2.1 Installation Notices...
Page 95: Installation Checklist
KINO-9455 Mini-ITX CPU Card When working with the KINO-9455, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system. Before and during the installation of the KINO-9455 DO NOT: Remove any of the stickers on the PCB board. These stickers are required for warranty validation.
Page 96: Cpu, Cpu Cooling Kit And Dimm Installation
Running a CPU without a cooling kit may also result in injury to the user. The CPU, CPU cooling kit and DIMM are the most critical components of the KINO-9455. If one of these component is not installed the KINO-9455 cannot run.
Page 97: Figure 5-1: Make Sure The Cpu Socket Retention Screw Is Unlocked
KINO-9455 Mini-ITX CPU Card To install a socket M CPU onto the KINO-9455, follow the steps below: WARNING: When handling the CPU, only hold it on the sides. DO NOT touch the pins at the bottom of the CPU. Step 1: Unlock the CPU retention screw.
Page 98: Figure 5-2: Lock The Cpu Socket Retention Screw
KINO-9455 Mini-ITX CPU Card CPU socket. See Figure 5-1. Step 5: Align the CPU pins. Carefully align the CPU pins with the holes in the CPU socket. Step 6: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are properly aligned, the CPU should slide into the CPU socket smoothly.
Page 99: Socket M Cf-518-Rs Cpu Cooling Kit Installation
KINO-9455 Mini-ITX CPU Card 5.3.2 Socket M CF-518-RS CPU Cooling Kit Installation Figure 5-3: IEI CF-518-RS Cooling Kit An IEI Socket M CPU cooling kit (Figure 5-3) can be purchased separately. The cooling kit comprises a CPU heat sink and a cooling fan.
Page 100: Figure 5-4: Securing The Cooling Kit
Figure 5-4: Securing the Cooling Kit Step 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on the KINO-9455. Carefully route the cable and avoid heat generating chips and fan blades. See Figure 5-5. Step 0:...
Page 101: Cooling Kit Cf-479B-Rs Installation
KINO-9455 Mini-ITX CPU Card 5.3.3 Cooling Kit CF-479B-RS Installation Figure 5-6: IEI CF-479B-RS Cooling Kit An IEI Socket M CPU cooling kit (Figure 5-6) can be purchased separately. The cooling kit comprises a CPU heat sink and a cooling fan.
Page 102: Figure 5-7: Cooling Kit Support Bracket
KINO-9455 Mini-ITX CPU Card Figure 5-7: Cooling Kit Support Bracket Step 4: Tighten the screws. Use a screwdriver to tighten the four screws. Tighten each nut a few turns at a time and do not over-tighten the screws. Step 5: Connect the fan cable.
Page 103: Dimm Installation
KINO-9455 are listed in Chapter 2. WARNING: Only DDR2 memory modules can be installed on the KINO-9455. Do not install DDR memory modules. If a DDR memory module is installed on the KINO-9455, the KINO-9455 may be irreparably damaged.
Page 104: Jumper Settings
OPEN a jumper means removing the Figure 5-10: Jumper Locations plastic clip from a jumper. Before the KINO-9455 is installed in the system, the jumpers must be set in accordance with the desired configuration. The jumpers on the KINO-9455 are listed in Table 5-1. Description...
Page 105: Clear Cmos Jumper
See Figure 5-11 Jumper Location: If the KINO-9455 fails to boot due to improper BIOS settings, the clear CMOS jumper resets the system BIOS information. To do this, use the jumper cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1 and 2.
Page 106: Lvds Voltage Selection
Figure 5-11: Clear CMOS Jumper 5.4.2 LVDS Voltage Selection WARNING: Permanent damage to the screen and KINO-9455 may occur if the wrong voltage is selected with this jumper. Please refer to the user guide that cam with the monitor to select the correct voltage.
Page 107: Rs-232/Rs-422 Or Rs-485 Serial Port Select Jumper
KINO-9455 Mini-ITX CPU Card The LVDS Voltage Selection jumper allows the LVDS screen voltage to be set. The LVDS Voltage Selection jumper settings are shown in Table 5-3. AT Power Select Description Short 1-2 +3V LVDS Default Short 3-4 +5V LVDS...
Page 108: Chassis Installation
WARNING: Airflow is critical to the cooling of the CPU and other onboard components. The chassis in which the KINO-9455 must have air vents to allow cool air to move into the system and hot air to move out. Page 90...
Page 109: Motherboard Installation
Table 5-5: IEI Provided Cables 5.6.2 ATA Flat Cable Connection The ATA 66/100 flat cable connects to the KINO-9455 to one or two IDE devices. To connect an IDE HDD to the KINO-9455 please follow the instructions below. Step 1: Locate the IDE connector.
Page 110: Dual Rs-232 Cable With Slot Bracket
KINO-9455 Mini-ITX CPU Card Figure 5-14: IDE Cable Connection Step 3: Connect the cable to an IDE device. Connect the two connectors on the other side of the cable to one or two IDE devices. Make sure that pin 1 on the cable corresponds to pin 1 on the connector.
Page 111: Sata Drive Connection
0: 5.6.4 SATA Drive Connection The KINO-9455 is shipped with two SATA drive cables and one SATA drive power cable. To connect the SATA drives to the connectors, please follow the steps below. Step 1: Locate the connectors.
Page 112: Figure 5-16: Sata Drive Cable Connection
KINO-9455 Mini-ITX CPU Card Figure 5-16: SATA Drive Cable Connection Step 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 5-17.
Page 113: External Peripheral Interface Connection
PS/2 devices Serial port devices TV cable USB devices VGA monitors To install these devices, connect the corresponding cable connector from the actual device to the corresponding KINO-9455 external peripheral interface connector making sure the pins are properly aligned. Page 95...
Page 114: Audio Connection
Mic In, blue is for Line In, green is for front speakers, orange is for the sub and center speaker, black is for rear speakers and gray is for side speakers. Follow the steps below to connect audio devices to the KINO-9455. Step 1: Locate the audio phone jacks.
Page 115: Ps/2 Keyboard And Mouse Connection
Step 0: 5.7.3 PS/2 Keyboard and Mouse Connection The KINO-9455 has a dual PS/2 connector on the external peripheral interface panel. The dual PS/2 connector is used to connect to a keyboard and mouse to the system. Follow the steps below to connect a keyboard and mouse to the KINO-9455.
Page 116: Serial Device Connection
KINO-9455 Mini-ITX CPU Card Figure 5-20: PS/2 Keyboard/Mouse Connector 5.7.4 Serial Device Connection The KINO-9455 has a single female DB-9 connector on the external peripheral interface panel for a serial device. Follow the steps below to connect a serial device to the KINO-9455.
Page 117: S-Video Cable Connection
KINO-9455 Mini-ITX CPU Card Figure 5-21: Serial Device Connector Step 3: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. Step 0: 5.7.5 S-video Cable Connection There is a single mini DIN TV out connector mounted on the CPU card as an external connector.
Page 118: Usb Connection (Dual Connector)
5.7.6 USB Connection (Dual Connector) The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the KINO-9455. Step 1: Locate the USB Series "A" receptacle connectors. The location of the USB Series "A"...
Page 119: Vga Monitor Connection
Figure 5-23: USB Connector 5.7.7 VGA Monitor Connection The KINO-9455 has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the KINO-9455, please follow the instructions below.
Page 120: Figure 5-24: Vga Connector
KINO-9455 Mini-ITX CPU Card Figure 5-24: VGA Connector Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector. Step 0:...
Page 121 KINO-9455 Mini-ITX CPU Card THIS PAGE IS INTENTIONALLY LEFT BLANK Page 103...
Page 122: Ami Bios
KINO-9455 Mini-ITX CPU Card Chapter AMI BIOS Page 104...
Page 123: Introduction
KINO-9455 Mini-ITX CPU Card 6.1 Introduction A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed.
Page 124: Getting Help
KINO-9455 Mini-ITX CPU Card F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 /F3 key Change color from total 16 colors. F2 to select color forward. F10 key Save all the CMOS changes, only for Main Menu Table 6-1: BIOS Navigation Keys 6.1.3 Getting Help...
Page 125: Main
KINO-9455 Mini-ITX CPU Card 6.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS Menu 1: Main System Overview The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed.
Page 126: Advanced
KINO-9455 Mini-ITX CPU Card Processor: Displays auto-detected CPU specifications Type: Names the currently installed processor Speed: Lists the processor speed Count: The number of CPUs on the motherboard System Memory: Displays the auto-detected system memory. Size: Lists memory size The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time option to set the system time.
Page 127: Cpu Configuration
KINO-9455 Mini-ITX CPU Card APM Configuration (see Section 6.3.6) Remote Access Configuration (see Section 6.3.7) USB Configuration (see Section 6.3.8) BIOS Menu 2: Advanced 6.3.1 CPU Configuration Use the CPU Configuration menu (BIOS Menu 3) to view detailed CPU specifications and configure the CPU.
Page 128: Ide Configuration
KINO-9455 Mini-ITX CPU Card BIOS Menu 3: CPU Configuration The CPU Configuration menu (BIOS Menu 3) lists the following CPU details: Manufacturer: Lists the name of the CPU manufacturer Brand String: Lists the brand name of the CPU being used...
Page 129 KINO-9455 Mini-ITX CPU Card BIOS Menu 4: IDE Configuration ATA/IDE Configurations [Compatible] Use the ATA/IDE Configurations option to configure the ATA/IDE controller. Disabled Disables the on-board ATA/IDE controller. Compatible Configures the on-board ATA/IDE controller to be in compatible mode. In this mode, a SATA channel will replace one of the IDE channels.
Page 130: Ide Master, Ide Slave
KINO-9455 Mini-ITX CPU Card channels are separated. This mode supports up to 6 storage devices. Some legacy OS do not support this mode. Legacy IDE Channels [PATA Pri, SATA Sec] SATA Only PATA Pri, SATA Sec (Default) PATA Pri., PATA Sec IDE Master and IDE Slave When entering setup, BIOS auto detects the presence of IDE devices.
Page 131 KINO-9455 Mini-ITX CPU Card BIOS Menu 5: IDE Master and IDE Slave Configuration Auto-Detected Drive Parameters The “grayed-out” items in the left frame are IDE disk drive parameters automatically detected from the firmware of the selected IDE disk drive. The drive parameters are listed as follows: Device: Lists the device type (e.g.
Page 132 KINO-9455 Mini-ITX CPU Card interrupt if block mode is not used. Block mode allows transfers of up to 64 KB per interrupt. PIO Mode: Indicates the PIO mode of the installed device. DMA Mode: Indicates the highest DMA Mode that is supported.
Page 133 KINO-9455 Mini-ITX CPU Card LBA/Large Mode [Auto] Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the maximum drive capacity is 137 GB.
Page 134 KINO-9455 Mini-ITX CPU Card PIO mode 0 selected with a maximum transfer rate of 3.3MBps PIO mode 1 selected with a maximum transfer rate of 5.2MBps PIO mode 2 selected with a maximum transfer rate of 8.3MBps PIO mode 3 selected with a maximum transfer rate of 11.1MBps PIO mode 4 selected with a maximum transfer rate of 16.6MBps...
Page 135 KINO-9455 Mini-ITX CPU Card UDMA1 Ultra DMA mode 0 selected with a maximum data transfer rate of 16.6MBps Ultra DMA mode 1 selected with a maximum data transfer UDMA1 rate of 25MBps UDMA2 Ultra DMA mode 2 selected with a maximum data transfer rate of 33.3MBps...
Page 136: Super Io Configuration
KINO-9455 Mini-ITX CPU Card Disabled Prevents the BIOS from using 32-bit data transfers. Enabled Allows BIOS to use 32-bit data transfers on supported EFAULT hard disk drives. 6.3.3 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 6) to set or change the configurations for the FDD controllers, parallel ports and serial ports.
Page 137 KINO-9455 Mini-ITX CPU Card Disabled No base address is assigned to Serial Port 1 3F8/IRQ4 Serial Port 1 I/O port address is 3F8 and the interrupt EFAULT address is IRQ4 3E8/IRQ4 Serial Port 1 I/O port address is 3E8 and the interrupt...
Page 138 KINO-9455 Mini-ITX CPU Card Serial Port2 Mode [Normal] Use the Serial Port2 Mode option to select the Serial Port2 operational mode. Normal Serial Port 2 mode is normal EFAULT IrDA Serial Port 2 mode is IrDA Serial Port 2 mode is ASK IR...
Page 139: Hardware Health Configuration
KINO-9455 Mini-ITX CPU Card Serial port 4 I/O port address is 3E8 Serial port 4 I/O port address is 2E8 EFAULT Serial port 4 I/O port address is 2E0 Serial Port4 IRQ [10] Use the Serial Port4 IRQ option to select the interrupt address for serial port 4.
Page 140 KINO-9455 Mini-ITX CPU Card BIOS Menu 7: Hardware Health Configuration CPU FAN 1 Mode Setting [Full On Mode] Use the CPU FAN 1 Mode Setting option to configure the second fan. Full On Mode Fan is on all the time...
Page 141 KINO-9455 Mini-ITX CPU Card CPU Temp. Limit of OFF CPU Temp. Limit of Start CPU Fan Start PWM Slope PWM 1 When the CPU FAN Mode Setting option is in the PWM Manual Mode, the following parameters can be set.
Page 142 KINO-9455 Mini-ITX CPU Card CPU Temp. Limit of Start [020] WARNING: Setting this value too high may cause the fan to start only when the CPU is at a high temperature and therefore cause the system to be damaged. The CPU Temp. Limit of Start option can only be set if the CPU FAN Mode Setting option is set to Automatic Mode.
Page 143 KINO-9455 Mini-ITX CPU Card Slope PWM 1 [1 PWM] The Slope PWM 1 option can only be set if the CPU FAN Mode Setting option is set to Automatic Mode. Use the Slope PWM 1 option to select the linear rate at which the PWM mode increases with respect to an increase in temperature.
Page 144: Acpi Configuration
KINO-9455 Mini-ITX CPU Card VBAT 6.3.5 ACPI Configuration The ACPI Configuration menu (BIOS Menu 8) configures the Advanced Configuration and Power Interface (ACPI) and Power Management (APM) options. BIOS Menu 8: ACPI Configuration ACPI Version Features [ACPI v1.0] Use the ACPI Version Features option to specify which ACPI version features to use.
Page 145: Apm Configuration
KINO-9455 Mini-ITX CPU Card ACPI v3.0 Use ACPI version 3.0 features Suspend Mode [S3(STR)] Use the Suspend Mode option to specify the sleep state the system enters when it is not being used. The system enters S1(POS) sleep state. The system S1 (POS) appears off.
Page 146 KINO-9455 Mini-ITX CPU Card BIOS Menu 9:Advanced Power Management Configuration Power Management/APM [Enabled] Use the Power Management/APM BIOS option to enable access to the advanced power management features. If this option is disabled, the only other option on the screen is the Power Button Mode.
Page 147 KINO-9455 Mini-ITX CPU Card Restore on AC Power Loss [Power Off] Use the Restore on AC Power Loss BIOS option to specify what state the system returns to if there is a sudden loss of power to the system. Power Off...
Page 148: Remote Access Configuration
KINO-9455 Mini-ITX CPU Card Disabled Wake event not generated by PCI-Express activity Enabled Wake event generated by PCI-Express activity EFAULT Resume On RTC Alarm [Disabled] Use the Resume On RTC Alarm option to specify the time the system should be roused from a suspended state.
Page 149 KINO-9455 Mini-ITX CPU Card BIOS Menu 10: Remote Access Configuration [Advanced] Remote Access [Disabled] Use the Remote Access option to enable or disable access to the remote functionalities of the system. Disabled Remote access is disabled. EFAULT Enabled Remote access configuration options shown below...
Page 150 KINO-9455 Mini-ITX CPU Card Flow Control Redirection after BIOS POST Terminal Type VT-UTF8 Combo Key Support These configuration options are discussed below. Serial Port Number [COM1] Use the Serial Port Number option allows to select the serial port used for remote access.
Page 151 KINO-9455 Mini-ITX CPU Card NOTE: Identical baud rate setting musts be set on the host (a management computer running a terminal software) and the slave Flow Control [None] Use the Flow Control option to report the flow control method for the console redirection application.
Page 152: Usb Configuration
KINO-9455 Mini-ITX CPU Card VT-UTF8 The target terminal type is VT-UTF8 VT-UTF8 Combo Key Support [Disabled] Use the VT-UFT8 Combo Key Support option to enable additional keys that are not provided by VT100 for the PC 101 keyboard. The VT100 Terminal Definition is the standard convention used to configure and conduct emergency management tasks with UNIX-based servers.
Page 153 KINO-9455 Mini-ITX CPU Card BIOS Menu 11: USB Configuration USB Configuration The USB Configuration field shows the system USB configuration. The items listed are: Module Version: x.xxxxx.xxxxx USB Devices Enabled The USB Devices Enabled field lists the USB devices that are enabled on the system USB Function [Enabled] Use the USB Function BIOS option to enable or disable USB function support.
Page 154 KINO-9455 Mini-ITX CPU Card Enabled USB function support enabled EFAULT USB 2.0 Controller [Enabled] Use the USB 2.0 Controller BIOS option to enable or disable the USB 2.0 controller Disabled USB 2.0 controller disabled USB 2.0 controller enabled Enabled EFAULT...
Page 155: Usb Mass Storage Device Configuration
KINO-9455 Mini-ITX CPU Card 6.3.8.1 USB Mass Storage Device Configuration Use the USB Mass Storage Device Configuration menu (BIOS Menu 12) to configure USB mass storage class devices. BIOS Menu 12: USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Use the USB Mass Storage Reset Delay option to set the number of seconds POST waits for the USB mass storage device after the start unit command.
Page 156 KINO-9455 Mini-ITX CPU Card device after the start unit command. 30 Sec POST waits 30 seconds for the USB mass storage device after the start unit command. 40 Sec POST waits 40 seconds for the USB mass storage device after the start unit command.
Page 157: Pci/Pnp
KINO-9455 Mini-ITX CPU Card respectively. Forced FDD Allows a hard disk image to be connected as a floppy image. This option works only for drives formatted with FAT12, FAT16 or FAT32. Hard Disk Allows the USB device to be emulated as hard disk responding to INT13h calls that return DL values of 80h or above.
Page 158 KINO-9455 Mini-ITX CPU Card BIOS Menu 13: PCI/PnP Configuration IRQ# [Available] Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral device. Available The specified IRQ is available to be used by EFAULT PCI/PnP devices...
Page 159 KINO-9455 Mini-ITX CPU Card IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ 11 IRQ 14 IRQ 15 DMA Channel# [Available] Use the DMA Channel# option to assign a specific DMA channel to a particular PCI/PnP device. Available The specified DMA is available to be used by...
Page 160: Boot
KINO-9455 Mini-ITX CPU Card 16KB reserved for legacy ISA devices 32KB reserved for legacy ISA devices 54KB reserved for legacy ISA devices 6.5 Boot Use the Boot menu (BIOS Menu 14) to configure system boot options. BIOS Menu 14: Boot 6.5.1 Boot Settings Configuration...
Page 161 KINO-9455 Mini-ITX CPU Card BIOS Menu 15: Boot Settings Configuration Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. Disabled No POST procedures are skipped Enabled Some POST procedures are skipped to decrease...
Page 162 KINO-9455 Mini-ITX CPU Card Disabled (Default) Cannot be booted from a remote system through the (Default) Can be booted from a remote system through the Enabled PS/2 Mouse Support [Enabled] Use the PS/2 Mouse Support option adjusts PS/2 mouse support capabilities.
Page 163: Boot Device Priority
KINO-9455 Mini-ITX CPU Card Bootup Num-Lock [On] Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be modified during boot up. Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad.
Page 164: Hard Disk Drives
KINO-9455 Mini-ITX CPU Card BIOS Menu 16: Boot Device Priority Settings 6.5.3 Hard Disk Drives Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs. When the menu is opened, the HDDs connected to the system are listed as shown below:...
Page 165 KINO-9455 Mini-ITX CPU Card NOTE: Only the drives connected to the system are shown. For example, if only two HDDs are connected only “1st Drive” and “2nd Drive” are listed. The boot sequence from the available devices is selected. If the “1st Drive” option is selected a list of available HDDs is shown.
Page 166: Cd/Dvd Drives
KINO-9455 Mini-ITX CPU Card 6.5.4 CD/DVD Drives Use the CD/DVD Drives menu to specify the boot sequence of the available CD/DVD drives. When the menu is opened, the CD drives and DVD drives connected to the system are listed as shown below:...
Page 167 KINO-9455 Mini-ITX CPU Card BIOS Menu 18: CD/DVD Drives Page 149...
Page 168: Security
KINO-9455 Mini-ITX CPU Card 6.6 Security Use the Security menu (BIOS Menu 19) to set system and user passwords. BIOS Menu 19: Security Change Supervisor Password Use the Change Supervisor Password to set or change a supervisor password. The default for this option is Not Installed. If a supervisor password must be installed, select this field and enter the password.
Page 169: Chipset
KINO-9455 Mini-ITX CPU Card Change User Password Use the Change User Password to set or change a user password. The default for this option is Not Installed. If a user password must be installed, select this field and enter the password.
Page 170 KINO-9455 Mini-ITX CPU Card BIOS Menu 20: Chipset Page 152...
Page 171: Northbridge Configuration
KINO-9455 Mini-ITX CPU Card 6.7.1 Northbridge Configuration Use the Northbridge Configuration menu (BIOS Menu 20) to configure the Northbridge chipset. BIOS Menu 21:Northbridge Chipset Configuration Memory Hole [Disabled] Use the Memory Hole option to reserve memory space between 15MB and 16MB for ISA expansion cards that require a specified area of memory to work properly.
Page 172 KINO-9455 Mini-ITX CPU Card 15MB – 16MB Between 15MB and 16MB of memory is reserved for ISA expansion cards Boots Graphics Adapter Priority [PEG/PCI] Use the Boots Graphics Adapter option to select the graphics controller used as the primary boot device. Select either an integrated graphics controller (IGD) or a combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
Page 173 KINO-9455 Mini-ITX CPU Card according to the system and graphics needs. Combo Mode A fixed portion of graphics memory is reserved as graphics memory. If more memory is needed, graphics memory dynamically allocated according to the system and graphics needs.
Page 174 KINO-9455 Mini-ITX CPU Card 1024*768(24bits) 1280*1024(48bits) Local Flat Panel Scaling [Auto] Use the Local Flat Panel Scaling option to select the method of scaling for the flat panel screen attached to the system. Scaling is automatic Auto EFAULT Forced Scaling...
Page 175: Southbridge Sis964 Configuration
KINO-9455 Mini-ITX CPU Card 6.7.2 Southbridge SiS964 Configuration The Southbridge SiS964 Configuration menu (BIOS Menu 22) allows the Southbridge chipset to be configured. BIOS Menu 22:Southbridge Chipset Configuration Audio Controller [Azalia] Use the Audio Controller Selection option to enable or disable the High Definition Audio CODEC.
Page 176: Exit
KINO-9455 Mini-ITX CPU Card ASF Support [Enabled] Use the ASF Support BIOS option to control the system’s ability to connect to a remote management server. Disabled The system will not communicate with a remote management server. Enabled The Alert Standard Format (ASF) controller is activated...
Page 177 KINO-9455 Mini-ITX CPU Card BIOS Menu 23:Exit Save Changes and Exit Use the Save Changes and Exit option to save the changes made to the BIOS options and to exit the BIOS configuration setup program. Discard Changes and Exit Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system.
Page 178 KINO-9455 Mini-ITX CPU Card Load Optimal Defaults Use the Load Optimal Defaults option to load the optimal default values for each of the parameters on the Setup menus. F9 key can be used for this operation. Load Failsafe Defaults Use the Load Failsafe Defaults option to load failsafe default values for each of the parameters on the Setup menus.
Page 179 KINO-9455 Mini-ITX CPU Card THIS PAGE IS INTENTIONALLY LEFT BLANK Page 161...
Page 180: Driver Installation
KINO-9455 Mini-ITX CPU Card Chapter Driver Installation Page 162...
Page 181: Available Software Drivers
LAN driver Installation instructions are given below. 7.2 Driver CD Auto-run All the drivers for the KINO-9455 are on the CD that came with the system. To install the drivers, please follow the steps below. Step 1: Insert the CD into a CD drive connected to the system.
Page 182: Figure 7-1: Introduction Screen
KINO-9455 Mini-ITX CPU Card Figure 7-1: Introduction Screen Step 4: A new screen with a list of available drivers appears (Figure 7-2). Page 164...
Page 183: Intel ® Chipset Driver Installation
KINO-9455 Mini-ITX CPU Card Figure 7-2: Available Drivers Step 5: Select the driver to install from the list in Figure 7-2. Step 0: ® 7.3 Intel Chipset Driver Installation To install the chipset driver, please follow the steps below. Step 1: Select INF from the list in Figure 7-2.
Page 184: Figure 7-3: Chipset Driver Installation Program
KINO-9455 Mini-ITX CPU Card Figure 7-3: Chipset Driver Installation Program Step 3: Double-click the infinst_Autol.exe icon. Step 4: The welcome screen in Figure 7-4 appears. Figure 7-4: Chipset Driver Installation Welcome Screen Step 5: Click N to continue the installation process.
Page 185: Figure 7-5: Chipset Driver Installation License Agreement
KINO-9455 Mini-ITX CPU Card Figure 7-5: Chipset Driver Installation License Agreement Step 7: Read the license agreement. To accept the terms and conditions stipulated in the agreement, click Y Step 8: The Readme file in Figure 7-6 appears. Figure 7-6: Chipset Driver Readme File Information...
Page 186: Intel ® Graphics Media Accelerator Driver Installation
KINO-9455 Mini-ITX CPU Card Step 10: After the driver installation process is complete, a confirmation screen appears (Figure 7-7). Figure 7-7: Chipset Driver Installation Complete Step 11: Click F to complete the driver installation. Step 0: INISH ® 7.4 Intel Graphics Media Accelerator Driver Installation To install the chipset driver, please follow the steps below.
Page 187: Figure 7-8: Select The Operating System
KINO-9455 Mini-ITX CPU Card Figure 7-8: Select the Operating System Step 3: Double-click the appropriate operating system folder. Step 4: A new window appears (Figure 7-9). Figure 7-9: VGA Driver Step 5: Double-click the installation program icon to continue the installation process.
Page 188: Figure 7-10: Intel® Graphics Media Accelerator Installshield Wizard
KINO-9455 Mini-ITX CPU Card Figure 7-10: Intel® Graphics Media Accelerator InstallShield Wizard Step 7: Read the Readme file information and click N to begin extracting files (Figure 7-11). Figure 7-11: InstallShield Wizard Extracting Files Step 8: The Graphics Media Accelerator Driver Welcome screen appears (Figure 7-12).
Page 189: Figure 7-12: Intel® Graphics Media Accelerator Driver Welcome Screen
KINO-9455 Mini-ITX CPU Card Figure 7-12: Intel® Graphics Media Accelerator Driver Welcome Screen Step 9: Click N and a license agreement appears (Figure 7-13). Figure 7-13: Intel® Graphics Media Accelerator Driver License Agreement Step 10: Read the license agreement. To accept the terms and conditions stipulated in...
Page 190: Broadcom Lan Driver (For Gbe Lan) Installation
KINO-9455 Mini-ITX CPU Card Figure 7-14: Intel® Graphics Media Accelerator Driver Installing Notice Step 11: After the driver installation process is complete, a confirmation screen appears (Figure 7-15). Figure 7-15: Intel® Graphics Media Accelerator Installation Complete Step 12: The confirmation screen offers the option of restarting the computer now or later.
Page 191: Figure 7-16: Windows Control Panel
KINO-9455 Mini-ITX CPU Card Figure 7-16: Windows Control Panel Step 2: Double-click the System icon (Figure 7-17). Figure 7-17: System Icon Step 3: Click the Device Manager tab (Figure 7-18). Page 173...
Page 192: Figure 7-18: Device Manager Tab
KINO-9455 Mini-ITX CPU Card Figure 7-18: Device Manager Tab Step 4: A list of system hardware devices appears (Figure 7-19). Page 174...
Page 193: Figure 7-19: Device Manager List
KINO-9455 Mini-ITX CPU Card Figure 7-19: Device Manager List Step 5: Double-click the listed device that has question marks next to it (this means Windows does not recognize the device). Step 6: The Device Driver Wizard appears (Figure 7-20). Page 175...
Page 194: Figure 7-20: Search For Suitable Driver
KINO-9455 Mini-ITX CPU Card Figure 7-20: Search for Suitable Driver Step 7: Select “Search for a suitable driver for my device (recommended),” and click to continue. Step 8: Select “Specify a Location” in the Locate Driver Files window (Figure 7-21).
Page 195: Realtek Hd Audio Driver (Alc883) Installation
KINO-9455 Mini-ITX CPU Card Figure 7-22: Location Browsing Window Step 11: Select the proper OS folder under the “X:\3-LAN\BROADCOM BCM57xx Drivers” directory in the Locate File window, where “X:\” is the system CD drive. Step 12: Click O and the driver is installed.Step 0:...
Page 196: Figure 7-23: Select The Audio Codec
KINO-9455 Mini-ITX CPU Card Figure 7-23: Select the Audio CODEC Step 3: Double-click the ALC883 folder. Step 4: Double-click the appropriate operating system folder (Figure 7-24). Page 178...
Page 197: Figure 7-24: Select The Os
KINO-9455 Mini-ITX CPU Card Figure 7-24: Select the OS Step 5: Double-click the appropriate operating system version folder (Figure 7-25). Figure 7-25: Select the OS Version Step 6: Double-click the Setup.exe program icon in Figure 7-26. Page 179...
Page 198: Figure 7-26: Locate The Setup Program Icon
KINO-9455 Mini-ITX CPU Card Figure 7-26: Locate the Setup Program Icon Step 7: The InstallShield Wizard starts (Figure 7-27). Figure 7-27: The InstallShield Wizard Starts Step 8: The InstallShield Wizard is prepared to guide the user through the rest of the process (Figure 7-28).
Page 199: Figure 7-28: Preparing Setup Screen
KINO-9455 Mini-ITX CPU Card Figure 7-28: Preparing Setup Screen Step 9: Once initialized, the InstallShield Wizard welcome screen appears (Figure 7-29). Figure 7-29: InstallShield Wizard Welcome Screen Step 10: Click N to continue the installation. Step 11: InstallShield starts to install the new software as shown in Figure 7-30.
Page 200: Figure 7-30: Audio Driver Software Configuration
KINO-9455 Mini-ITX CPU Card Figure 7-30: Audio Driver Software Configuration Step 12: The Installation Wizard updates the system as shown in Figure 7-31. Figure 7-31: Installation Wizard Updates the System Step 13: After the driver installation process is complete, a confirmation screen appears (Figure 7-32).
Page 201: Figure 7-32: Restart The Computer
KINO-9455 Mini-ITX CPU Card Figure 7-32: Restart the Computer Step 14: The confirmation screen offers the option of restarting the computer now or later. For the settings to take effect, the computer must be restarted. Click F INISH restart the computer.
Page 202: Abios Options
KINO-9455 Mini-ITX CPU Card Appendix BIOS Options Page 184...
Page 203 KINO-9455 Mini-ITX CPU Card System Overview ......................107 System Time [xx:xx:xx] ....................108 System Date [xx/xx/xx] ..................... 108 ATA/IDE Configurations [Compatible] ................111 Legacy IDE Channels [PATA Pri, SATA Sec]..............112 IDE Master and IDE Slave....................112 Auto-Detected Drive Parameters..................113 Type [Auto] .........................114 ZIP............................114...
Page 204 KINO-9455 Mini-ITX CPU Card Resume on PME/LAN# [Disabled]................... 129 Resume on PCI-Express WAKE# [Enabled] ..............129 Resume On RTC Alarm [Disabled] .................. 130 RTC Alarm Date (Days)..................... 130 System Time ........................130 Remote Access [Disabled]....................131 Serial Port Number ......................131 Serial Port Mode........................
Page 205 KINO-9455 Mini-ITX CPU Card Quiet Boot [Disabled] ....................... 144 AddOn ROM Display Mode [Force BIOS] ............... 144 Bootup Num-Lock [On] ....................145 Change Supervisor Password ..................150 Change User Password....................151 Boot Sector Virus Protection [Disabled] ................ 151 Memory Hole [Disabled] ....................153 Boots Graphics Adapter Priority [PEG/PCI] ..............
Page 206: Bterminology
KINO-9455 Mini-ITX CPU Card Appendix Terminology Page 188...
Page 207 KINO-9455 Mini-ITX CPU Card Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® AC ’97 in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface.
Page 208 KINO-9455 Mini-ITX CPU Card The Digital-to-Analog Converter (DAC) converts digital signals to analog signals. Double Data Rate refers to a data bus transferring data on both the rising and falling edges of the clock signal. Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory.
Page 209 KINO-9455 Mini-ITX CPU Card Hard disk drive (HDD) is a type of magnetic, non-volatile computer storage device that stores digitally encoded data. The Input/Ouput Controll Hub (ICH) is an Intel® Southbridge chipset. Infrared Data Association (IrDA) specify infrared data transmission...
Page 210 KINO-9455 Mini-ITX CPU Card Universal Asynchronous Receiver-transmitter (UART) is responsible for UART asynchronous communications on the system and manages the system’s serial communication (COM) ports. The Universal Host Controller Interface (UHCI) specification is a UHCI register-level interface description for USB 1.1 Host Controllers.
Page 211 KINO-9455 Mini-ITX CPU Card THIS PAGE IS INTENTIONALLY LEFT BLANK Page 193...
Page 212: Cdio Interface
KINO-9455 Mini-ITX CPU Card Appendix DIO Interface Page 194...
Page 213: Dio Interface Introduction
KINO-9455 Mini-ITX CPU Card C.1 DIO Interface Introduction The DIO connector on the KINO-9455 is interfaced to GIO ports on the iTE Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices.
Page 214: Assembly Language Samples
KINO-9455 Mini-ITX CPU Card C.3 Assembly Language Samples C.3.1 Enable the DIO Input Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O input functions is listed below. AX, 6F08H Sets the digital port as input Initiates the INT 15H BIOS call C.3.2 Enable the DIO Output Function...
Page 215 KINO-9455 Mini-ITX CPU Card THIS PAGE IS INTENTIONALLY LEFT BLANK Page 197...
Page 216: Dwatchdog Timer
KINO-9455 Mini-ITX CPU Card Appendix Watchdog Timer Page 198...
Page 217 KINO-9455 Mini-ITX CPU Card NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.
Page 218 KINO-9455 Mini-ITX CPU Card NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
Page 219 KINO-9455 Mini-ITX CPU Card THIS PAGE IS INTENTIONALLY LEFT BLANK Page 201...
Page 220: Eaddress Mapping
KINO-9455 Mini-ITX CPU Card Appendix Address Mapping Page 202...
Page 221: Address Map
KINO-9455 Mini-ITX CPU Card E.1 Address Map I/O address Range Description 000-01F DMA Controller 020-021 Interrupt Controller 040-043 System time 060-06F Keyboard Controller 070-07F System CMOS/Real time Clock 080-09F DMA Controller 0A0-0A1 Interrupt Controller 0C0-0DF DMA Controller 0F0-0FF Numeric data processor...
Page 222: Irq Mapping Table
KINO-9455 Mini-ITX CPU Card E.3 IRQ Mapping Table IRQ0 System Timer IRQ8 RTC clock IRQ1 Keyboard IRQ9 ACPI IRQ2 Available IRQ10 IRQ3 COM2 IRQ11 LAN/USB2.0/SATA IRQ4 COM1 IRQ12 PS/2 mouse IRQ5 SMBus Controller IRQ13 IRQ6 IRQ14 Primary IDE IRQ7 Available...
Page 223 KINO-9455 Mini-ITX CPU Card THIS PAGE IS INTENTIONALLY LEFT BLANK Page 205...
Page 224: Hazardous Materials Disclosure
KINO-9455 Mini-ITX CPU Card Appendix Hazardous Materials Disclosure Page 206...
Page 225: Hazardous Material Disclosure Table For Ipb Products Certified As Rohs Compliant Under 2002/95/Ec Without Mercury
KINO-9455 Mini-ITX CPU Card F.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 226 KINO-9455 Mini-ITX CPU Card Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply...
Page 227 KINO-9455 Mini-ITX CPU Card 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体显示印刷电路板金属螺帽电缆组装风扇组装电力供应组装电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。...
Page 228: Gindex
KINO-9455 Mini-ITX CPU Card Index Page 210...
Page 229 KINO-9455 Mini-ITX CPU Card 139, 141, 142, 143, 144, 145, 146, 148, 149, 150, 151, 152, 156, 157, 158 BIOS chipset ........25 ACPI..........125 Advanced Power Management ..127, airflow ..........89 cables ..........90 anti-static precautions ....34, 74 ATA flat cable .........
Page 230 KINO-9455 Mini-ITX CPU Card RJ-45 connector ......67 panel..........11 TV connector........70 DIMM ..........84 USB port ......... 69 installation........84 connectors, pinouts and location specifcations........84 ATX power........41 DIO Interface ........187 audio..........42 Drivers backlight inverter ......43 Broadcom GbE LAN ....
Page 231 KINO-9455 Mini-ITX CPU Card LAN connector ........67 LCD display ........43 hard disk drives backlight inverter connector ... 43 SATA..........60 HDD LED ........... 47 HDD..........47 heat sink ........80, 82 power ..........47 LPC bus..........25 LPC interface ........ 22, 29 LVDS display........
Page 232 KINO-9455 Mini-ITX CPU Card RS-232/485 serial port select jumper.. 88 location..........89 PCI interface ........22 settings ..........89 PCI slot..........56 RS-422 ..........61 location and pinouts ......56 COM 2 location and pinouts ... 61 peripheral connectors ......41 RS-485 ..........
Page 233 KINO-9455 Mini-ITX CPU Card system voltages ......120, 124 USB 1.1..........64 USB 2.0........64, 135 USB 2.0 port ........69 USB connector, internal...... 64 technical specifications ......6 location and pinouts ......64 temperature ........120 USB device connection....... 99 TV connector........

IEI Technology KINO-9455 User Manual

Quick Links

Related Manuals for IEI Technology KINO-9455

Summary of Contents for IEI Technology KINO-9455