Table of Contents
Advertisement
KINO-DQM871 Mini-ITX SBC
Partition 1: /
Partition 2: SWAP
NOTE:
Please reserve enough space for partition 3 for saving recovery
images.
Figure B-31: Partitions for Linux
Step 3:
Create a recovery partition. Insert the recovery CD into the optical disk drive.
Follow
Step 1
commands (marked in red) to create a partition for recovery images.
system32>diskpart
DISKPART>list vol
DISKPART>sel disk 0
DISKPART>create part pri size=
DISKPART>assign letter=N
DISKPART>exit
system32>format N: /fs:ntfs /q /v:Recovery /y
system32>exit
Step 4:
Build the recovery partition. Press any key to boot from the recovery CD. It will
take a while to launch the recovery tool. Please be patient. When the recovery
tool setup menu appears, type <3> and press <Enter> (Figure B-32). The
Symantec Ghost window appears and starts configuring the system to build a
~
Step 3
described in Section B.2.2. Then type the following
___
Page 167
Advertisement
Table of Contents
