Serial Device Connection; Figure 4-14: Lan Connection - IEI Technology KINO-DQM871 User Manual

Figure 4-14: LAN Connection

Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.

4.9.4 Serial Device Connection

The KINO-DQM871 has a single female DB-9 connector on the external peripheral
interface panel for a serial device. Follow the steps below to connect a serial device to the
KINO-DQM871.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-15.
Page 72
KINO-DQM871 Mini-ITX SBC
Step 0: