Battery Connector; Figure 3-3: Battery Connector Location - IEI Technology KINO-DQM871 User Manual

KINO-DQM871 Mini-ITX SBC

3.2.2 Battery Connector

CAUTION:
Risk of explosion if battery is replaced by and incorrect type. Only
certified engineers should replace the on-board battery.
Dispose of used batteries according to instructions and local
regulations.
CN Label: BAT1
CN Type: 2-pin wafer
CN Location: See Figure 3-3
CN Pinouts: See Table 3-4
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.

Figure 3-3: Battery Connector Location

Page 19