Table of Contents
Advertisement
Many of your system features have been put into a User Menu that
you can access from any Security Command™ keypad. The menu
requires you to enter your user code. Only those functions to which
you have access display.
Accessing the User Menu
Press the COMMAND key until MENU? NO YES displays.
1.
2.
Select YES. The keypad displays ENTER CODE: — . Enter
your user code and press COMMAND. You can now scroll
down through the list of system features available to you.
User Menu Options
The following list shows the User Menu options in order:
Menu Option
Description
USER CHECKIN
Allows check-in with the system to
indicate arrival on premises.
ZONE ACTIVITY CHECK
Allows you to monitor a zone for non-
activity.
SENSOR RESET
Resets smoke or glassbreak detectors
that have latched during an alarm
condition.
OUTPUTS ON/OFF
Allows you to turn on or off any of the
outputs described in the System Setup
section of this guide.
BYPASS ZONES
Allows you to Bypass a zone or reset an
already bypassed zone.
20
User Menu
ZONE MONITOR
SYSTEM TEST
USER CODES
SCHEDULES
DATE AND TIME
DISPLAY EVENTS
SERVICE REQUEST
The following pages detail each User Menu item and provide
instructions on when and how to use them properly.
XR20 User's Guide
Allows you to add or remove a zone from
the monitor mode.
Tests the system siren, communication
to the central station, and backup
battery.
Allows you to add, delete, or change
user codes and authority levels.
Allows you to add, remove, or change
system schedules.
Allows you change the Day, Date, or
Time that is currently in the system.
Allows you to view the last 100 system
events that occurred on your system.
Allows you to send a message to the
Central Station requesting service on
the alarm system.
User Menu
Advertisement
Table of Contents
