Service Menu
Submenu Aux1 Configuration
Select the AUX1 CONFIG MENU from the SYSTEMS MENU with the UP and DOWN keys and open the menu
step with the PLUS (V+) key.
The AUX1 CONFIG MENU shows following operational steps:
Setup
No signal
Temperatures 2
Aux1 I/O
Aux2 I/O
Aux3 I/O
Backlight
Close and save this menu step by pushing the MENU key once.
© 02.07 TAMUZ - LCD Video Monitors
Aux1 Configuration
Input high
2
Input low
Temperature
2
2
2
2
Note: This menu is normally hidden and for service purposes only. Don't use to modify for
your individual use.
select the event for the AUX1 GPI/O remote port,
2
when the trigger pulse is high
select the event for the AUX1 GPI/O remote port,
2
when the trigger pulse is low
60 °C
select the threshold for the temperature to trigger the
AUX1 as an alarm to be used for switching external
HCM Series Broadcast Monitor
GOLDEN EAGLE
Help
devices
Page - 87 -