Dc Voltage; Power Supply - TAMUZ HCM 112 Operation Manual

Connections of the Monitor

DC Voltage

The DC voltage to operate the GOLDEN EAGLE HCM 1xx series video monitor will be supplied by an
external Power Supply. The connection happens with a XLR 4pin or 5pin port at the rear.
The pin-out of the XLR4M port is shown in following table:
The pin-out of the XLR5M port is shown in following table:

Power Supply

Interconnect the mains output using a reliable cord with the IEC port of the external Power Supply.
The pin-out of the IEC port is shown in following table:
© 02.07 TAMUZ - LCD Video Monitors
Pin
Pin
Pin
1 (N)
2 (P)
3 (GND)
Note: Warning about dangerous electrical voltages to or within the equipment. Take care to
use the correct power cord depending to your local electricity safety system.
Function
1 Ground
2 NC
3 NC
4 + 12 V DC
Function
1 Ground
2 NC
3 NC
4 NC
5 + 24 V DC
Function
Neutral
Phase
Ground
HCM Series Broadcast Monitor
GOLDEN EAGLE
Page - 24 -