Main Menu
Submenu Auto Color
Select the AUTO COLOR MENU from the SYSTEMS MENU with the UP and DOWN keys and open the menu
step with the PLUS (V+) key.
The AUTO COLOR MENU shows following operational steps:
SYSTEM
Power On
Search
Processing
Language
OSD
Wall
RGB Adjust
Auto Color
Backlight
Anti Sticking
Close and save this menu step by pushing the MENU key once.
© 02.07 TAMUZ - LCD Video Monitors
Auto Color
Probe Setup
2
Calibrate
2
Brightness
2
Measure
2
Status
2
x
2
y
2
Y cd/m
2
2
Whitepoint x
2
Whitepoint y
2
User Gamma
Note: This menu is normally hidden and for service purposes only. Do not use to modify for
your individual use. For more details see the service section of this manual.
Note: Only when User Gamma is enabled the measured LUT (look-up-table) effects the
displayed image. If not, the standard default LUT's will be used.
opens the menu to select the type of the probe
2
starts the automatically calibration for color
starts the automatic calibration for brightness
starts the manual measure mode
Idle
shows the data activity at the probe port
0
shows the current x-value of the measured light
0
shows the current y-value of the measured light
0
shows the current luma value of the measured light
307
allows the individual setup for the x white point
321
allows the individual setup for the y white point
enables the measured user gamma
HCM Series Broadcast Monitor
GOLDEN EAGLE
Help
Page - 73 -