Submenu Zoom - TAMUZ HCM 112 Operation Manual

Main Menu

Submenu Zoom

Select the ZOOM MENU from the SCALING MENU with the UP and DOWN keys and open the menu step
with the PLUS (V+) key.
The ZOOM MENU shows following operational steps:
SCALING
4 : 3
16 : 9
14 : 9
1 : 1
2 : 1
Full Screen
Scan Mode
Mirror
Signal
Display
Zoom
Reset
Close and save this menu step by pushing the MENU key once.
© 02.07 TAMUZ - LCD Video Monitors
Zoom Setup
x-Factor
y-Factor
x-Position
y-Position
2
Off
2
2
2
8
Note: To enable the Zoom, use the menu SCAN MODE and enable this feature there.
2.00 Adjust the horizontal ZOOM factor to magnify the image on
Note: Selecting this menu step with the PLUS (V+) or
MINUS (V-) key for an individual setting. Values between 0 to
2.00 Adjust the vertical ZOOM factor to magnify the image on
Note: Selecting this menu step with the PLUS (V+) or
MINUS (V-) key for an individual setting. Values between 0 to
0 Adjust the horizontal position on the screen.
Note: Selecting this menu step with the PLUS (V+) or
MINUS (V-) key for an individual setting. The value is limited
to the native panel resolution.
0 Adjust the vertical position on the screen.
Note: Selecting this menu step with the PLUS (V+) or
MINUS (V-) key for an individual setting. The value is limited
to the native panel resolution.
HCM Series Broadcast Monitor
GOLDEN EAGLE
Help
screen.
100 are possible.
screen.
100 are possible.
Page - 51 -