Submenu Scan Mode - TAMUZ HCM 112 Operation Manual

Main Menu

Submenu Scan Mode

Select the SCAN MODE MENU from the SCALING MENU with the UP and DOWN keys and open the menu
step with the PLUS (V+) key.
The SCAN MODE MENU shows following operational steps:
SCALING
4 : 3
16 : 9
14 : 9
1 : 1
2 : 1
Full Screen
Scan Mode
Mirror
Signal
Display
Zoom
Reset
Close and save this menu step by pushing the MENU key once.
© 02.07 TAMUZ - LCD Video Monitors
Scan Mode
Underscan
Normal
Overscan
Zoom
2
Off
2
2
2
8
Note: The NORMAL mode shows the active area of any kind of video signal on the screen. In
the UNDERSCAN mode all lines, even the sync area, of the signals becomes visible.
Help
selects the Underscan mode (shows all lines)
selects the Normal mode (active area)
selects the Overscan mode (-10%)
selects the Zoom mode (user definable)
HCM Series Broadcast Monitor
GOLDEN EAGLE
Page - 44 -