Submenu Format For Sdi Inputs; Submenu Wss - TAMUZ HCM 112 Operation Manual

Main Menu

Submenu Format for SDI inputs

Select the FORMAT MENU from the INPUT MENU with the UP and DOWN keys and open the menu step
with the PLUS (V+) key.
The FORMAT MENU shows following operational steps when input SDI is selected:
INPUTS
CCVS 1
CCVS 2
Y/C
CAV
SDI 1
SDI 2
HD SDI 1
HD SDI 2
VGA 1
VGA 2
DVI
Format
Close and save this menu step by pushing the MENU key once.

Submenu WSS

Select the WSS MENU from the INPUTS - FORMAT MENU when SDI or CCVS input is selected with the UP
and DOWN keys and open the menu step with the PLUS (V+) key.
The WSS MENU shows following operational steps:
WSS
Only when the displayed signal contains the wide screen signal pulse in his ancillary date and the
WSS feature is enabled the aspect ratio follows the signal.
Close and save this menu step by pushing the MENU key once.
© 02.07 TAMUZ - LCD Video Monitors
Format
WSS
2
Note: In some cases the video signal contains a WSS (wide screen signal) information within
his ancillary data and switches the monitor automatically to the correct aspect ratio. This
mode is available for SDI and CCVS signals only.
Format
Note: In some cases the video signal contains a WSS (wide screen signal) information within
his ancillary data and switches the monitor automatically to the correct aspect ratio. This
mode is available for SDI and CCVS signals only.
Help
enables the WSS feature
Help
WSS detects wide screen signals automatically from the
WSS data within the signal
HCM Series Broadcast Monitor
GOLDEN EAGLE
Page - 40 -