Password For Alignment; The Color Alignment Procedure - TAMUZ HCM 112 Operation Manual

Alignment of LCD Monitors

Password for Alignment

To enable the hidden Alignment features within a TAMUZ monitor open the menu SYSTEM using the
front panel keys or the IR remote.
Select the SYSTEM MENU from the MAIN MENU with the UP and DOWN keys and open the menu step
with the PLUS (V+) key.
If the SYSTEM menu is visible like below, trigger the MINUS (V-) key twice and close the SYSTEM me-
nu with the MENU key.
TAMUZ LCD
INPUTS
SCALING
IMAGE
KEYBOARD
SYSTEM
Thereafter open the SYSTEM menu again with the PLUS (V+) key and the alignment functions a en-
abled until the next power off.
TAMUZ LCD
INPUTS
SCALING
IMAGE
KEYBOARD
SYSTEM
Follow the menu instructions to align the monitor with the menu AUTO COLOR.

The Color Alignment Procedure

The AUTO COLOR MENU shows following operational steps:
SYSTEM
Power On
Search
Processing
Language
© 02.07 TAMUZ - LCD Video Monitors
SYSTEM
Power On
2
Search
2
Processing
2
2 Language
2 OSD
Wall
RGB Adjust
Auto Color
Backlight
Anti Sticking
SYSTEM
Power On
2
Search
2
Processing
2
Language
2
OSD
2
Wall
RGB Adjust
Auto Color
Backlight
Anti Sticking
Note: Enabled hidden features are available until next power off only.
Auto Color
2 Probe Setup
Calibrate
2
Brightness
2
Measure
2
selects the input the monitor starts with at power on
2
selects the inputs the monitor will search for
2
selects which type of processing will be used
2
selects the language for the OSD menu
2
opens the OSD setup menu
2
opens the WALL setup menu
2
opens the RGB ADJUSTMENTS setup menu
2
opens the RGB ADJUSTMENTS setup menu
2
opens the AUTO COLOR setup menu
2
opens the ANTI STICKING setup menu
2
selects the input the monitor starts with at power on
2
selects the inputs the monitor will search for
2
selects which type of processing will be used
2
selects the language for the OSD menu
2
opens the OSD setup menu
2
opens the WALL setup menu
2
opens the RGB ADJUSTMENTS setup menu
2
opens the RGB ADJUSTMENTS setup menu
2
opens the AUTO COLOR setup menu
2
opens the ANTI STICKING setup menu
2
2 opens the menu to select the type of the probe
starts the automatically calibration for color
starts the automatic calibration for brightness
starts the manual measure mode
HCM Series Broadcast Monitor
GOLDEN EAGLE
Help
Help
Help
Page - 105 -