Video Inputs At Version Hcm 1Xx Db; Bnc Inputs; Optional Input Yc; Optional Input Dvi - TAMUZ HCM 112 Operation Manual

Connections of the Monitor

Video Inputs at Version HCM 1xx DB

The version HCM 1xx DB of the GOLDEN EAGLE series was designed for serial digital component
(SDI) signals and analog composite video signals in the formats PAL, SECAM or NTSC and VGA
graphic signals. Optionally a DVI port can be equipped.
Connect your video source using standard 75 Ohm BNC cables to the input ports at the rear of the
monitor. The inputs are internally 75 Ohm terminated. There is no need for an external standard 75
ohm terminating resistor. Connect your VGA graphic source using standard Sub-HD15 cables to the
input ports at the rear of the monitor.

BNC Inputs

Depending on the version of the device the allocation of the ports varies. The respectively BNC jack
pair is described as input and loop. The loop is an active loop, no signal comes out if power off. De-
tails see the table below or at the rear of the monitor.
The allocation of the BNC ports is shown in following table:
Model / Interface
Type
HCM 1xx DB

Optional Input YC

As an option of the HCM 1xx GOLDEN EAGLE series the right pair of BNC ports is defined as a YC
input, left as Y (Luminance) and right as C (Chrominance). The YC signal input is separated, use a ad-
apter to split the 4pin Mini-DIN connections.

Optional Input DVI

As an option of the HCM 1xx DB of the GOLDEN EAGLE series a DVI input can be equipped. This
option has been equipped when ordered.

Signal Format

The video monitors HCM 1xx DB of the GOLDEN EAGLE series are designed as a MultiFormat and
MultiSync monitors to be used with signals in the format PAL/SECAM 625/50 or NTSC 525/60, regard-
less if analog or digital version.
© 02.07 TAMUZ - LCD Video Monitors
Series
GOLDEN EAGLE PAL / NTSC / Secam
Format VGA 1 In VGA 2 In
VGA
HCM Series Broadcast Monitor
GOLDEN EAGLE
CCVS 1 In CCVS 2 In
VGA CCVS CCVS
CCVS 3 In SDI In
YC SDI
Page - 27 -