Gpi/O Interface - TAMUZ HCM 112 Operation Manual

Connections of the Monitor

GPI/O Interface

For some special application a so-called GPI/O interface is helpful to control the monitor by external
events or get an information from or to external devices, like tally. Built-in at all GOLDEN EAGLE
HCM 1xx series monitors.
The pin-out of the GPI/O port is shown in following table:
Pin
The GPI/O feature is standard at all GOLDEN EAGLE HCM 1xx series monitors.
© 02.07 TAMUZ - LCD Video Monitors
Function
1 GPI Tally Green, closed contact +
2 GPI Tally Red, closed contact +
3 GPI 16:9 / 4:3, closed contact +
4 GPI Input SDI 1, closed contact +
5 GPI Input SDI 2, closed contact +
6 GPI Input SDI 3, closed contact +
7 GPO Input SDI 1 active, +5 V
8 GPO Input SDI 2 active, +5 V
Pin Function
9 GPO Input SDI 1 active, +5 V
10 Ground (GND)
11 Not Connected
12 Not Connected
13 Not Connected
14 Not Connected
15 Not Connected
HCM Series Broadcast Monitor
GOLDEN EAGLE
Page - 30 -