Video Inputs At Version Lsm 1Xxw; Dvi Inputs; Optional Input Ccvs; Signal Format - TAMUZ LSM 124W Operation Manual

Sparrow hawk series
Table of Contents

Advertisement

Connections of the Monitor

Video Inputs at Version LSM 1xxW

The version LSM 1xxW of the SPARROWHAWK series was designed for digital graphic signals (DVI)
and VGA graphic signals in any common or uncommon resolution. Optionally analog composite video
signals for the formats PAL, SECAM or NTSC can be equipped.
Connect your video source using standard 75 Ohm BNC cables to the input ports at the rear of the
monitor. The inputs are internally 75 Ohm terminated. There is no need for an external standard 75
ohm terminating resistor.

DVI Inputs

Depending on the version of the device the allocation of the ports varies. The respectively DVI jack is
described as input.
The allocation of the ports is shown in following table:
Model / Interface
Type
LSM 1xxW
SPARROWHAWK
Connect your DVI graphic source using standard DVI-D cables to the input ports at the rear of the mo-
nitor.
This port accepts all common or uncommon analog graphic signals regarding his MultiFormat Mul-
tiSync capability. For supported formats check the chapter VGA Formats in the service section.

Optional Input CCVS

As an option of the LSM 1xxW of the SPARROWHAWK series a pair of BNC ports is defined as
CCVS input, left as input 1 and right as input 2. This option has been equipped when ordered.

Signal Format

The video monitors LSM 1xxW of the SPARROWHAWK series are designed as a MultiFormat and
MultiSync monitors to be used with signals in the format PAL/SECAM 625/50 or NTSC 525/60, regard-
less if analog or digital version.
As standard the integrated signal processor recognizes the video format automatically and adapts it-
self to this correspondingly. The picture aspect ratios should be adapted by adjusting H and V size to
the video screen size if necessary (service available under service conditions only).
Usually the wide screen monitor type shows a full screen picture every time feeding 16:9 images. In
case of a 4:3 aspect ratio image, select the 4:3 mode using the OSD menu.
© 02.07 TAMUZ - LCD Video Monitors
Series
Format
Graphics
Input 1
Input 2
Input 3
CCVS
CCVS
DVI
LSM Digital Broadcast Monitor
SPARROWHAWK
Input 4
Input 5
Input 6
---
---
VGA
Page - 25 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents