Appendix A Setting Up A Tftp Server; Set Up A Tftp Server; In A Linux Environment; In A Windows Environment - CyberData VoIP V2 Operation Manual

Appendix A: Setting Up a TFTP Server
A.1 Set up a TFTP Server
Autoprovisioning requires a TFTP server for hosting the configuration file.
A.1.1 In a LINUX Environment
To set up a TFTP server on LINUX:
1. Create a directory dedicated to the TFTP server, and move the files to be uploaded to that
directory.
2. Run the following command where
Step
in.tftpd -l -s /tftpboot/your_directory_name
A.1.2 In a Windows Environment
You can find several options online for setting up a Windows TFTP server. This example explains
how to use the Solarwinds freeware TFTP server, which you can download at:
http://www.cyberdata.net/support/voip/solarwinds.html
To set up a TFTP server on Windows:
1. Install and start the software.
2. Select File
Make a note of the default directory name, and then move the firmware files to be uploaded to that
directory.
CyberData Corporation
1: the directory that contains the files to be uploaded. For example:
/ /
Configure Security tab
930367H
is the path to the directory you created in
/tftpboot/
/
Transmit Only.
46
Operations Guide