Upgrade The Firmware - CyberData VoIP V2 Operation Manual

2.5.0.1 Upgrade the Firmware

To upload the firmware from your computer:
1. Retrieve the latest V2 Paging Server firmware from the VoIP V2 Paging Server Downloads page
at:
http://www.cyberdata.net/products/voip/digitalanalog/pagingserverv2/downloads.html
2. Unzip the V2 Paging Server version file. This file may contain the following:
•
•
3. Log in to the V2 Paging Server home page as instructed in
Configuration
4. Click the Update Firmware button to open the Upgrade Firmware page. See
5. Click Browse, and then navigate to the location of the V2 Paging Server firmware file.
6. Click Submit.
Note
CyberData Corporation
Firmware file
Release notes
GUI".
This starts the upload process. Once the V2 Paging Server has uploaded the file, the
Uploading Firmware countdown page appears, indicating that the firmware is being
written to flash. The V2 Paging Server will automatically reboot when the upload is
complete. When the countdown finishes, the Upgrade Firmware page will refresh. The
uploaded firmware filename should be displayed in the system configuration (indicating
successful upload and reboot).
930367H
Setting Up the V2 Paging Server
Upgrading the Firmware
Section 2.4.3, "Log in to the
Figure
Operations Guide
45
2-24.