Connecting The Telephone Cable; Connecting The Mains Cable - Xerox IF6020 User Manual

office-fax-if-6020-6025-manual-uk-253200935-a.book Seite 22 Mittwoch, 22. April 2009 5:58 17

Connecting the Telephone Cable

Connecting the Telephone Cable
Notice
Analogue Fax Machine
Your device is an analogue fax device (Group 3). It is not an ISDN device (Group 4),
and therefore it cannot be operated directly on an ISDN connection. In order to do
this, you need either an analogue adapter or a connection for analogue terminals.
Connecting the Telephone Cable
Connect the telephone cable to the device by inserting it in the socket designated with LINE
(RJ-11-Connector). Insert the telephone plug into your PTT line socket.
Telefonkabel anschließen
PABX Systems 1
Notice
Connection to Private Automatic Branch Exchange
If you connect your device as extension to a telephone system, you must set it for
working as an extension (also see Chapter
devices
, page 55).

Connecting the Mains Cable

Mains Voltage at the Site of Installation
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device (indicated on the type label)
matches the mains voltage available at the setup location.
Connecting the Mains Cable
Insert the mains cable into the connection located on the rear side of the device. Plug the
power cable into the electrical outlet.
Netzkabel anschließen Faxjet
22 ¦ Initial Operation · Connecting the Telephone Cable
Telephone connections and additional
CAUTION!