Easy Programming Of Auto Download Id #'S And Pc Preset Callback Numbers; Central Station Receiver 1 Account Number; Central Station Receiver 1 Format - Gemini GEM-P9600 Programming Instructions Manual
Control panel/communicator
Hide thumbs
Also See for GEM-P9600:
- Programming instructions manual (80 pages) ,
- Installation instructions manual (68 pages) ,
- User manual (68 pages)
Table of Contents
Advertisement
WI 1185 6/03
Easy Programming of Auto download ID #'s and PC Preset Callback Numbers (GEM-RP1CAe2 only)
For unattended PC Preset downloading, it is now possible to set the Auto download ID #'s and PC Preset Callback
from the Keypad Easy Program Mode.
•
At the field for CENTRAL PHONE #, program an "F" followed by the Auto Download ID # (2 digits) and then the
Callback Telco # (up to 13 digits).
•
U
Press
to save.
•
Exit Program Mode (
CC
•
Enter Master Code
•
Press
R
•
Go to Function "ACTIVATE DOWNLOAD Y/N" and press YES (
•
The panel will automatically call the PC Preset computer and download the program on the specified Auto
CENTRAL PHONE #
F 0 7 1 5 1 6 8 4 2 9 4 0 0
•
Go to Central Phone # input screen and press: [*] [5] [0] [7] [1] [5] [1] [6] [8] [4] [2] [9] [4] [0] [0] [ON/OFF]
Central Station Receiver 1 Account Number
Acc #
•
•
( _ _ _ _ )
•
(Direct Entry)
NOTE: Central Station Receiver 2 and 3 Account Numbers must be entered in Direct Address Programming. See
CS Reporting Options.
Central Station Receiver 1 Format
RecFmt
•
•
( )
•
•
(Direct Entry)
DATA
CS RECEIVER 1 FORMAT
ENTRY
blank(•) Ademco Slow, Silent Knight Slow
1
Sescoa, Vertex, DCI, Franklin
Fast
2
Radionics Fast
3
Silent Knight Fast
4
Radionics, DCI, Franklin Slow
5
Universal High Speed
8
Radionics BFSK
L
NAPCO Security Systems
).
Download line # of PC Preset.
Example: Program an Auto download ID # of 07 and a PC Preset Callback #
of 1-516-842-9400
Enter an account number of up to four digits.
Press
0
through
9
for digits 0–9, and
U
Press
to save and press the NEXT/YES button to proceed.
From the table at the right enter the receiver format.
Press
0
through
9
, and
Press
G1
through
G4
U
Press
to save and press the NEXT/YES button to proceed.
DATA
CS RECEIVER 1 FORMAT
ENTRY
9
0
Radionics Modem 2
B
C
Ademco Point ID
D
Ademco Express
E
).
P
G 0
for a blank (
•
G0
for blank (
).
for letters B–E.
NOTE: Modem IIe is available only in Direct
Address
FBI 4/3/1
Receiver 2 and 3 Formats can only be entered
in Direct Address Programming. See CS
SIA
Receiver Options.
Pager
X
GEM-P9600 Programming Instructions
Page 9
•
).
Programming.
Central
!
Station
Advertisement
Table of Contents
