Central Station Receiver 1 Tel. Number; Central Station Receiver 1 Account Number; Central Station Receiver 1 Format - Gemini GEM-P9600 Programming Instructions Manual
Control panel/communicator
Hide thumbs
Also See for GEM-P9600:
- Programming instructions manual (80 pages) ,
- Installation instructions manual (68 pages) ,
- User manual (68 pages)
Table of Contents
Advertisement
WI 1185 6/03
24
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
3
_
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
(Direct Entry)
25
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
3
_
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
(Direct Entry)
26
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
8
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
(Direct Entry)
DATA
CS RECEIVER 1 FORMAT
ENTRY
blank(•) Ademco Slow, Silent Knight Slow
1
Sescoa, Vertex, DCI, Franklin
Fast
2
Radionics Fast
3
Silent Knight Fast
4
Radionics, DCI, Franklin Slow
5
Universal High Speed
8
Radionics BFSK
L
NAPCO Security Systems
Central Station Receiver 1 Telephone Number
•
Enter telephone number of up to 16 digits.
•
Press
through
1
9
•
Press
G 1
through
•
Pre-Dial Delay = "D" (
G 4
•
U
Press
to save and press the NEXT/YES button to proceed.
NOTE: Central Station Receiver 2 and 3 Telephone Numbers must be entered in Direct Address Program-
ming. See CS Receiver Options.
Central Station Receiver 1 Account Number
•
Enter an account number of up to four digits.
•
Press
0
through
9
•
U
Press
to save and press the NEXT/YES button to proceed.
NOTE: Central Station Receiver 2 and 3 Account Numbers must be entered in Direct Address Program-
ming. See CS Reporting Options.
Central Station Receiver 1 Format
•
From the table at the right enter the receiver format.
•
Press
through
, and
0
9
•
Press
through
G1
•
U
Press
to save and press the NEXT/YES button to proceed.
DATA
CS RECEIVER 1 FORMAT
ENTRY
9
FBI 4/3/1
0
Radionics Modem 2
B
SIA
C
Ademco Point ID
D
Ademco Express
E
Pager
for digits 1–9;
for a zero and
G 0
G 5
for letters B–F, respectively.
); Dial-Tone Detection = "E" (
for digits 0–9, and
G 0
•
for blank (
).
G0
for letters B–E.
G4
NOTE: Modem IIe is available only in Direct
Address
Programming.
Receiver 2 and 3 Formats can only be entered
in Direct Address Programming. See CS
Receiver Options.
X
GEM-P9600 Programming Instructions
Page 17
•
for a blank (
).
0
G 5
).
•
for a blank (
).
Central
Station
!
Advertisement
Table of Contents
