Headlight Bulb Replacement; Headlight Beam Adjustment; Rear Combination Light Components - Suzuki kq500 Service Manual

9B-2 Lighting Systems:
Installation
Install the headlight in the reverse order of removal. Pay
attention to the following point:
• After installing, be sure to inspect the headlight beam.
Refer to "Headlight Beam Adjustment (Page 9B-2)".

Headlight Bulb Replacement

CAUTION
!
• If you touch the bulb with your bare hands,
clean the bulb with a cloth moistened with
alcohol or soapy water to prevent
premature bulb failure.
• Do not use bulb other than those with
predetermined wattage.
• Remove the bulb when it gets cool, since it
may be heated to an extremely high
temperature when the headlight is turned
ON.
1) Remove the headlight housing cover (1) and bulb
socket rubber cap (2).
1
2) Disconnect the headlight coupler (3).

Rear Combination Light components

3) Replace the headlight bulb (4) by unhooking the bulb
holder spring (5).
B931H29206003
4) Reinstall the removed parts.
NOTE
Properly fit the bulb socket rubber cap and
headlight housing cover.

Headlight Beam Adjustment

Adjust the headlight vertical beam.
2
I931H1920003-01
1. Brake light/Taillight bulb (12 V 21/5 W)
4
5
1
3
I931H1920004-01
B931H29206004
I931H1920005-01
B931H29206005
I831G1920019-04