Footrest Construction; Footrest Removal And Installation - Suzuki kq500 Service Manual

9E-2 Body Structure:

Footrest Construction

1. Footrest (R)
2. Footrest (L)

Footrest Removal and Installation

Removal
1) Remove the mud guard. Refer to "Rear Side
Exterior Parts Removal and Installation: in
Section 9D".
2) Remove the rear brake cable clamp (1) (RH).
1
3) Remove the footrest (2) (RH & LH).
3
(b)
3. Footrest plate
: 26 N⋅m (2.6 kgf-m, 19.0 lbf-ft)
B931H29506003
I931H1950001-01
2
I931H1950002-01
1
(a)
3
: 55 N⋅m (5.5 kgf-m, 40.0 lbf-ft)
: Apply thread lock to the thread part.
Installation
Install the footrest in the reverse order of removal. Pay
attention to the following point:
• Apply thread lock to the footrest mounting bolts and
tighten them to the special torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Footrest mounting bolt (M8) (a): 26 N·m (2.6 kgf-
m, 19.0 lbf-ft)
Footrest mounting bolt (M10) (b): 55 N·m (5.5 kgf-
m, 40.0 lbf-ft)
(a)
B931H29506002
2
I831G1950001-04
(b)
I931H1950003-01