Reset To Factory - Alcatel Temporis IP 600 Administrator's Manual

changes to phone configuration.
To reboot via Web interface:
Choose Upgrade->Basic.
Click Reboot button.
You are prompted to confirm the change, press OK to confirm the changes, press
Cancel to cancel the operation.
Note:
Please do not power off during reboot, or it will cause the flash memory error.

Reset to Factory

You should reset the phone only in this case: the phone configuration was changed and
the phone is not functioning anymore. To maintain the configuration of the phone, you
need your system administrator or service provider's advice.
To reset to factory via phone interface:
Press the Menu soft key->3.Settings->2.Advanced
You are prompted to enter the required password.
Scroll to Reset to factory option, and press OK key to enter the configuration
interface.
You are prompted to confirm the change, press OK key to reset to factory settings, or
press Cancel soft key to return to previous menu.
It will take a few minutes to reset, please do not power off during resetting, or it will
cause flash memory error.
Note:
The reset to factory option must done in the admin mode.
To reset to factory via Web interface:
Choose Upgrade->Basic.
Click Reset button.
You are prompted to confirm the change, press OK to confirm the changes, press
Temporis IP 600 Administrator guide version 0.1 - 82 -