Auto Answer - Alcatel Temporis IP 600 Administrator's Manual

Intercom Allow: To set whether to answer the incoming intercom calls.
Intercom Mute: To set whether to mute the incoming intercom calls automatically.
Intercom Tone: To set whether to play ring tones when there is incoming intercom calls
to your extension.
Intercom Barge: To set whether to answer the incoming intercom calls during a
conversation. If the option is enabled, when there is incoming intercom calls to your
extension, if you are on an intercom conversation, it will refuse the call automatically;
or it will put the current call on hold and put the incoming intercom call through.
Make your selection and pres Switch soft key to enable/disable the feature.
Press the OK key to save your changes.
To configure Intercom option via web interface:
Go to Phone->Features and set Intercom related parameters
Press Confirm button to save your changes or Delete to discard.
Note:
To initiate an Intercom call you can either use a function key or speed dial key or
directly type a code supported by your PBX. Please see Key Configuration chapter.

Auto Answer

Auto answer allows an incoming call to be answered without requiring any action by the
user. This is a useful feature for people who have some kind of impairment. This
function is set on a per account basis.
This function should be enabled/disabled by admins or vars.
To set Auto Answer via the IP phone interface:
Press Menu soft key->3.Settings->2.Advanced, enter the password and press OK
key.
Then choose 1.Accounts-> Select an account and confirm with OK key.
Use the navigation keys to select Auto Answer option and press the Switch soft key
to enable or disable the auto answer function. The default setting is Disable.
Press the OK key to save the changes.
Temporis IP 600 Administrator guide version 0.1 - 58 -