Send Key Configuration - Alcatel Temporis IP 600 Administrator's Manual

Send Key configuration

Admins can set a specific button ("#" or "*") as the send key. If this feature is enabled,
once you've dialed the desired number, you can press this send key to call your
correspondent immediately.
To set the send key via the IP phone interface:
Make sure active User Type is admin or var.
Press Menu soft key->2.Features->4.End of Dialing Key->press OK key to enter
the configuration page.
Press Switch soft key to choose a button that you want to use as the send key: "#", "*",
or disable this option. Note that current active option is indicated by a "*".
Press the OK key to save the changes.
To set send key via the Web interface:
Choose Phone-> Features-> Send Key.
Highlight the specific one in the pull-down menu, then click the Confirm button to save
the change or Cancel button to discard.
Temporis IP 600 Administrator guide version 0.1 - 42 -