Auto Redial - Alcatel Temporis IP 600 Administrator's Manual

Press the OK key to save your changes.
To configure Call Completion via web interface:
Go to Phone > Features > Call Completion
Select desired status (Enabled/disabled) and press Confirm button to save your changes.

Auto Redial

Auto redial is a phone feature that redials a busy number in a fixed number of times
before giving up.
Purpose is similar to Call Completion, but the implementation is purely local and hence
is available in all scenarios without server support.
To set auto redial via IP phone interface:
Make sure the active User Type is admin or var.
Press Menu soft key->2.Features->7.Auto Redial ->press OK key to enter the
configuration page.
Use Switch soft key to enable the auto redial function.
Press the navigation keys to choose and set the redial interval. It is measured by
seconds.
Press the navigation keys to choose and set the number of times redial will take place.
Press the OK key to save the changes.
Note:
When Auto redial is enabled, if your phone receives a Busy response for an outgoing
call, you will be prompted if you wish to Auto redial or not. If you press Cancel softkey
or do not press any keys for 5 seconds the phone will return to idle interface and Auto
redial will not take place.
To set auto redial via Web interface:
Choose Phone->Features->Auto Redial.
Choose Enabled or Disabled in the pull-down menu, click confirm button to save the
change or Cancel butto to discard.
Temporis IP 600 Administrator guide version 0.1 - 45 -