Table of Contents
Advertisement
Transfer
You
are
able
to
configure
a
key
as
a
transfer
key
to
perform
the
Blind/Attended/Semi-Attended Transfer. The main difference with Transfer hard key is
in this case you can pre-configure the number to which transfer will be performed. This
is very useful when there is a limited number of numbers to which you usually transfer
your calls.
To assign the key as Transfer via Web Interface:
Choose Phone->Function Keys-> Line Key, choose one of the keys on which you want
to make the assignment. From the pull-down menu in the Type field, select Transfer
from the list.
Enter the Number in the "Value" field. In this case, when you are on an conversation,
press this key, the phone will Blind transfer to the number. If you leave it blank, key will
behave as transfer hard key.
Press Confirm button to save the changes.
Hold
The key can be configured as a hold key. You can use this key to hold and retrieve a call
during the conversation.
To assign the key as Hold via Web Interface:
Choose Phone-> Function Keys -> Line Key, choose one of the keys on which you want
to make the assignment. From the pull-down menu in the Type field, select Hold from
the list.
Press Confirm button to save the changes.
DND
If the key is configured as DND key, it will work as a toggle key to enable/disable this
service.
Please check DND chapter in the Incoming calls section of Basic Call Functions chapter
for more information about this function.
To assign the key as DND:
Choose Phone-> Function Keys -> Line Key, choose one of the keys on which you want
to make the assignment. From the pull-down menu in the Type field, select DND from
the list.
Press Confirm button to save the changes.
Redial
If a key is configured as Redial key:
Temporis IP 600 Administrator guide version 0.1
- 95 -
Hide quick links:
Advertisement
Table of Contents
