Maintenance Tasks; User Levels; Administrator Mode; Reboot - Alcatel Temporis IP 600 Administrator's Manual

Maintenance Tasks

User levels

The phone allows three modes to configure the phone:
User Mode
VAR mode

Administrator Mode

Administrator mode grants unlimited access to the phone configuration on both Web
and Phone interface. User Mode is not able to access the settings on the Phone interface
such as: Accounts, Network, Reset to Factory, other advance phone settings. VAR mode
grants access to subset of Administrator functions (Login and password are var/var).
Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator password is needed to access Web
interface and the advanced settings menu of the phone such as Network, Account,
Reset to Factory.
The default administrator password is admin.
To change the administrator password via phone interface:
Press the Menu soft key->3.Settings-> 2.Advanced.
You are prompted to enter the required password.
Scroll to Set Password, press OK key.
Enter current password, then enter new password and finally confirm new password.
Press abc soft key to change the input method.
Press OK key to confirm the change, or Back soft key to return to the previous menu.
To change the administrator password via web interface:
Choose Security->Password->admin, enter the Current, New and Confirm password,
click Confirm button to save the changes, or Cancel button to cancel the changes.
To logout via Web interface:
Click the Logout button at the top right corner.

Reboot

You should reboot the phone when you are asked to, e.g. after applying specific
Temporis IP 600 Administrator guide version 0.1 - 81 -