Alcatel Temporis IP 600 Administrator's Manual page 100

Local PhoneBook
Broadsoft Group
Note:
Many of those features require IP PBX or service provider support and hence must be
configured in the server first in order to work on your phone. Contact your system
administrator or Technical support for more details.
In addition, please note that not all the servers support the just above mentioned
features
Conference
You are allowed to configure the Line key to be used as a conference key while
remaining in the current call. This key allows a user on a call to conference another
party while remaining in the conference.
To assign the key as Conference via Web Interface:
Choose Phone->Function Keys-> Line Key. Choose one of the keys on which you want
to make the assignment, select Conference from the list in the pull down menu.
Press Confirm button to save the changes.
Forward
Two use cases can be considered for this function. If a key is configured as Forward key:
When you press this key during an incoming call, you will be able to divert this call
directly. Depending on your configuration you will be prompted to enter target number,
or stored value will be used. This function can be used, for example, to divert certain
calls to your voicemail
When you press it in idle status the IP phone will enter the forward interface. In this
case you will be able to enable CF and set the phone number to which calls must be
forwarded if it had not been set previously. Forward type will be the latest used. By
pressing the key again CF will be disabled.
To assign the key as Forward via Web Interface:
Choose Phone->Function Keys-> Line Key; choose one of the keys on which you want
to make the assignment. In the pull-down menu select Forward from the list.
Enter the extension number you want to forward to in the Extension field.
Press Confirm button to save the changes.
Temporis IP 600 Administrator guide version 0.1 - 94 -