Firmware Update And Autoprovisioning - Alcatel Temporis IP 600 Administrator's Manual

Action URI Remote control commands which can be used to generate CTI applications
using Temporis IP600.
Please ask your Technical Support for more details on these features.

Firmware Update and Autoprovisioning

The phone is delivered with pre-installed firmware. If you require updating the phone's
firmware, please contact your system administrator. You can only update the firmware
via Web interface.
To update the firmware manually via Web interface:
Choose Upgrade->Basic->Browse, select the firmware file in your local computer.
Click Upgrade button to update the new firmware.
Please do not power off during the updating.
To update the firmware and configuration automatically via Web interface or using the
phone GUI, you will need to set up an autoprovision environment:
Note:
Please check with your Technical Support for the Autoprovisioning guide.
To launch autoprovisioning using web interface :
Choose Upgrade->Advanced, configure necessary settings: Custom Option, Custom
Option Type, URL, Account, Password, Common AES Key and MAC-Oriented AES Key,
PNP config and Check New Config etc.
Press Confirm button, the phone will check the server for a new firmware in a specific
time, and it updates automatically if there is new firmware.
You can also update the firmware immediately by pressing Auto-provision button.
Set Auto Provision via phone interface:
Go to Menu soft key->3.Settings->2.Advanced -> 7.Auto Provision.
Enter the URL, User Name and Password.
Click the OK key to save the changes.
Note:
Any power interruption during the subsequent process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore. The procedure can be
Temporis IP 600 Administrator guide version 0.1 - 86 -