Custom Soft Key Configuration File Settings - Alcatel Temporis IP150 Administration And Provisioning Manual

Redial
Messages
End
Dial
Input (alpha/numeric selection for text input mode)
Cancel
Backspc

Custom Soft Key Configuration File Settings

The custom soft keys parameters are included in the "softkey" module. For more
information, see "softkey" Module: Custom Soft Key Settings on page 239.
To modify a soft key parameter, enter values separated by commas. Soft keys appear on
the phone screen in the same order as the soft key values you enter. For example, if you
take IP150, IP151, IP251G, IP300, IP301G or IP1850, the parameter/value combination of
softkey.idle = line,dir,settings will result in the Idle screen shown below:
Note in the above example
only one softkey level.
If for Conference IP1850 you take the default parameter/value combination softkey.idle =
redial,line,pc_spk, call_log,blank ,dir the idle screen below would result:
And this would be the idle screen for an IP700G or IP701G where softkey.idle =
line,call_fwd, dir,settings,call_log,redial,message,dnd
.
Business IP Range Administration and Provisioning Guide
 
and icons are not displayed as the configured value yields
Redial
Message
End
Dial
123
Cancel
Backspc
ed 2.2 47/247