Configuring Scene Changing; Configuring Audio Detection - Honeywell HDZ402LIWV User Manual

Note
11. Click Save to apply the settings.

Configuring Scene Changing

You can configure scene change settings on the Setting Event Video Detection
 Scene Changing page.
To enable camera tampering detection:
1. Click Enable and then configure parameter info according to the actual requirements.
2. Please refer to Motion Detection for more details about parameter config.
3. Click Save to complete configuration.

Configuring Audio Detection

You can configure audio event settings on the Setting  Event  Audio Detection  Audio
Detection page.
For the snapshot to be attached to the email notification, the Attachment
check box must be selected in Setting  Network  SMTP(Email).
40X ZOOM IR PTZ DOME CAMERA USER GUIDE
57