Table of Contents
Advertisement
10. AMI BIOS Configuration
S.M.A.R.T.
10.3.2.11.
S. M. A. R. T. (Self-Monitoring, Analysis and Reporting Technology) is used to predict drive failures. (The integrated drive
has to support this feature).
Available Settings are: Auto, Disabled and Enabled.
32Bit Data Transfer
10.3.2.12.
This option allows you to enable or disable the 32bit data transfer rate for the IDE devices. If this option is "Enabled" the
date transfer is accelerated and the CPU (PCI Bus) is relieved.
Available settings are: Enabled and Disabled.
10.3.3. Floppy Configuration
Floppy A
10.3.3.1.
This option selects the type of the floppy drive. Only one floppy device can be connected to the FDD connector.
Possible settings are: Disabled, 360KB 5¼", 1.2MB 5¼", 720 KB 3½", 1.44 MB 3½" and 2.88 MB 3½".
Disabled
Set this value to prevent the use of the selected floppy disk drive channel. This option should be set if no
floppy disk drive is installed on the specified channel.
360KB 5¼"
Set this value if the floppy disk drive attached to the corresponding channel is a 360 KB 5¼" floppy disk
drive.
1.2MB 5¼"
Set this value if the floppy disk drive attached to the corresponding channel is a 1.2 MB 5¼" floppy disk
drive.
720KB 3½"
Set this value if the floppy disk drive attached to the corresponding channel is a 720 KB 3½" floppy disk
drive.
1.44MB 3½" Set this value if the floppy disk drive attached to the corresponding channel is a 1.44 MB 3½" floppy disk
drive.
2.88 MB 3½" Set this value if the floppy disk drive attached to the corresponding channel is a 2.88 MB 3½" floppy disk
drive.
44
PCI-759 – User's Guide (V1.02)
www.kontron.com
Advertisement
Table of Contents
