Kontron PCI-759 User Manual page 61

10. AMI BIOS Configuration
PS/2 Mouse Support
10.5.1.5.
This option allows you to activate or to restrict the PS/2 mouse support.
It is possible to choose between: Auto, Enabled and Disabled.
Enabled Set this value to force the system to reserve an IRQ for PS/2 devices.
Disabled This option will prevent the PS/2 mouse port from using system resources and will prevent the port
from being active. Use this setting if you want to install an external serial mouse.
Auto Set this value to allow the BIOS to auto-detect a PS/2 mouse and to reserve the resources for it.
Wait For 'F1' If Error
10.5.1.6.
This option specifies if errors detected during the boot time, determine the interruption of the boot procedure.
It is possible to choose between: Enabled and Disabled.
Enabled The boot procedure is stopped, whenever the BIOS detect an error. The system waits for a user input.
Disabled The boot procedure will be not halted for any error that may be detected.
Hit 'DEL' Message Display
10.5.1.7.
This option allows you to modify the setting for "Hit 'DEL' Message Display".
It is possible to choose between: Enabled and Disabled.
Enabled This setting allows the system to display:
during memory initialization.
If "Quiet Boot" option is enabled, the Hit 'DEL' message will not display.
Disabled This setting prevents the system to display:
during memory initialization.
If "Quiet Boot" option is enabled, the Hit 'DEL' message will not display.
Interrupt 19 Capture
10.5.1.8.
Set this value to allow option ROMs such as network controllers to trap BIOS interrupt 19.
It is possible to choose between: Enabled and Disabled.
Enabled The BIOS allows option ROMs to trap interrupt 19.
Disabled The BIOS prevents option ROMs from trapping interrupt 19.
www.kontron.com
Hit Del to enter Setup
Hit Del to enter Setup
PCI-759 – User's Guide (V1.02)
59