Kontron PCI-759 User Manual page 69

10. AMI BIOS Configuration
DRAM Frequency
10.7.1.1.
The available settings are: Auto, 400 MHz, 533MHz and 667 MHz.
Configure DRAM Timing by SPD
10.7.1.2.
The available settings are: Enabled and Disabled.
Memory Hole
10.7.1.3.
In order to improve performance, certain space in memory can be reserved for ISA cards. This memory must be mapped
into the memory space 15MB-16MB.
The available settings are: 15MB-16MB and Disabled.
Initiate Graphic Adapter
10.7.1.4.
These settings allow you to select the graphics controller used as primary boot device.
The available settings are: IGD, PCI/IGD.
PEG: PCI Express Graphics
PCI: PCI Device
Internal Graphics Mode Select
10.7.1.5.
This option allows you to select the amount of system memory used by the internal graphics device.
Available settings are: Enabled, 1MB, / Enabled, 8MB, / Disabled.
If the [Internal Graphics Mode Select] option is set to "disabled" the submenu [Video Function
Configuration] is not available (refer to the picture below).
www.kontron.com
PCI-759 – User's Guide (V1.02)
67