Set Route Options; Display Entire Route - Becker MAP PILOT Operating Manual

Set route options

You can adjust route options (route
selection etc.) during the destination
navigation.
> In the route menu, select
.
options
> Configure
the route
described under "Route options" on
page 45.
After any modification, the route will be
recalculated.

Display Entire route

You can view the entire route to the
destination on the map. You can also see
the entire route description and block
specific route sections/roads permanently.
Route
As an additional option, you can also view
options as the various routes that can be selected in
Route options and select one if desired.
> In the route menu, select
The entire route is displayed.
In the left area, you can see the remaining
section and the expected trip time. The
destination address is displayed in the
lower area.
Select
Resume
the destination navigation.
.
Show route
in order to continue with
NAVIGATION MODE
Display route list
You can have the route displayed on a list.
> When the entire route is displayed,
select .
Route list
The route list is displayed.
Set route options.
You can set the route options.
> When the entire route is displayed,
select .
Options
> Select
.
Route options
> Configure
the route
described under "Route options" on
page 45.
After any modification, the route will be
recalculated.
>>>
> EN
options as
40