Manual Recalculation; The Map Display - Becker TRAFFIC STAR NAVIGATION Operating Manual

Manual recalculation

If a traffic announcement affects your
route, a window with detailed informa-
tion on the traffic announcement appears.
By selecting you can specify
Detour
whether or not the message is to be taken
into account in the route calculation.
Note:
A detour is not generally calculated when
you select . This is only done
Detour
when it is feasible in terms of time savings
and the route to be driven.
You can change your chosen setting at any
time in the message list.
If after the selection of
Becker® TRAFFIC
NAVIGATION determines that an expe-
dient alternative route is possible, the fol-
lowing display appears.
The display provides you with an over-
view of the alternative route calculated.
The red route or route marked purple for
an obstruction shows the previous route.
The route marked green displays the alter-
native route calculated.
In the upper section of the display, you
can see for the previous route and the al-
ternative route the distance to be travelled
and the estimated journey time.
the
Detour > Select the desired route.
STAR
NAVIGATION MODE

The map display

The map display is used primarily for
route guidance. However, you can also use
the map display without route guidance to
show your current position and, for exam-
ple, to receive warnings about exceeding
the speed limit.
Note:
The map display can show signs (e.g.
speed limits). Please note that this is ad-
ditional information in the map data.
The reality may differ from those signs.
The traffic situation and the local road
signs take precedence over the navigation
system information.
>>>
> ZH
> EN
31