Using The Input Menu; Entering Characters - Becker MAP PILOT Operating Manual

>>> GENERAL OPERATION
The navigation satellites currently availa-
ble are shown in the bottom right corner.
> D
If no valid location can be determined in
> GB
spite of received satellites, the icon
displayed.
> F
> I
If route guidance is already active, the cur-
rent destination address is displayed in the
> E
bottom line.
> P
> NL
> DK
> S
To cancel route guidance, push the rotary
> N
control/push button downwards and then
press the rotary control/push button.
> FIN
In the main menu the route guidance can
> TR
also be canceled by pressing the
button.
> GR
> PL
> CZ
> H
> RUS
12

Using the input menu

Some applications require input using the
input menu.
is
The characters input using the input
menu are displayed in the top line of text.
The middle section is used for character
entry. The bottom section can display a
list of all cities corresponding to the letters
entered so far when entering a city, for ex-
ample.
Note:
The input menus that are not used for
destination input are locked when your
C
vehicle is travelling at a speed in excess of
5 km/h. If you are currently in such an
input menu, a message indicating that
the menu has been locked will be dis-
played. The menus are enabled again
when the speed falls below 3 km/h.

Entering characters

Characters are input by selecting them
with the rotary control/push button.
When a navigation destination is entered,
the Becker® MAP PILOT compares the
data with the stored data.
Only those letters that are still possible are
available for selection.
If you have selected enough letters, a list
automatically appears. Select the desired
entry from the list using the rotary con-
trol/push button.
Note:
Pressing the button deletes the last
C
character entered.
A space is entered when the underscore
character (_) is selected in the input
menu.