Using The Input Menu; Entering Characters; Selecting From A List - Becker MAP PILOT Instructions For Use Manual

Using the input menu

Some applications require input using the
input menu.
The characters input using the input
menu are displayed in the top line of text.
The middle section is used for character
entry. The bottom section can display a
list of all cities corresponding to the letters
entered so far when entering a city, for ex-
ample.
Note:
The input menus that are not used for
destination input are locked when your
vehicle is traveling at a speed in excess of
3 mph. If you are currently in such an in-
put menu, a message indicating that the
menu has been locked will be displayed.
The menus are enabled again when the
speed falls below 2 mph.

Entering characters

Characters are input by selecting them
with the rotary control/push button.
When a navigation destination is entered,
the Becker® MAP PILOT compares the
data with the stored data.
Only those letters that are still possible are
available for selection.
If you have selected enough letters, a list
automatically appears. Select the desired
entry from the list using the rotary con-
trol/push button.
Note:
Pressing the button deletes the last
CLR
character entered.
A space is entered when the underscore
character (_) is selected in the input
menu.
GENERAL OPERATION

Selecting from a list

Once a few letters of the desired selection
have been entered, you can select your
destination from the selection list.
> In the input menu, push the rotary con-
trol/push button downwards.
> Select the desired entry from the list us-
ing the rotary control/push button.
The entry is accepted and the selection list
is closed.
>>>
> USE
> FR
> ES
14