2. Remove 2 screws (
A – LCD Cover Panel Switch Board Screws
This completes the disassembly of the front cover assembly. Reverse this
procedure to properly reassemble.
LCD Panel Assembly
Remove the LCD Panel assembly as follows.
1. Disconnect cables from the LCD cable at P4 on the main board and the LED
sub-assembly cable at connector P2.
2. Remove two screws (
the remainder of the system.
3-24 Disassembly and Reassembly
) and lift from the front cover assembly.
A
) and lift and separate the LCD panel assembly from
A
A – LCD Panel Assembly Screws
B – Connector CP17