Hard Drive Assembly
1. Disconnect the hard drive cable at connector P9 on the main board.
2. Remove three screws (
PC Card Assembly
1. Remove three screws (
2. Lift the PC card assembly from the right side of the system.
CMOS Battery
1. Disconnect the CMOS battery cable from connector P28 on the main board.
2. The CMOS battery is held in place by double-sided pressure tape. Gently
pry up to remove.
3-26 Disassembly and Reassembly
A
) and lift the hard drive assembly from the system.
A – Hard Disk Drive Screws
A
).
A – CPU Assembly Screws