2. Remove two screws (
the remainder of the system.
LED Sub Assembly
The LED sub assembly consists of a board that contains three connectors and
status LEDs. The connectors are for the LCD panel switch, main board, and
microphone.
LCD Panel Switch
1. Remove two screws on the hinge bracket.
2. Disconnect the cable at connector CP13 on the LED board.
3-16 Disassembly and Reassembly
) and lift and separate the LCD panel assembly from
A
A – LCD Panel Assembly Screws
A – Connector CP13
B – Connector CP12
C – Connector CP11
D – Microphone