Bottom Base Assembly; Reassembly - NEC VERSA LX Service And Reference Manual

4. Remove one screw (
assembly.

Bottom Base Assembly

There are doors and tilt feet on the bottom assembly.
T
All doors snap in and out.
T
To remove the tilt feet open the foot and slightly compress the four
sections together and snap out.

Reassembly

Reassembly is the reverse of the disassembly process. Use care to insure that all
cables and screws are returned to their proper positions.
) to release the connector board from the bottom
A
A – Screws B – Connector CP8
Disassembly and Reassembly 3-29