1. Remove two screws (
Versa as shown in the following figure.
2. Remove the CPU cover.
3. Remove three screws (
4. Lift and disconnect the CPU assembly from the unit.
Front Cover
The following describes the steps to remove the front cover.
1. Turn the system over with the bottom facing up.
2. Remove a total of 11 screws.
T
6 from the bottom surface
) from the CPU bay cover on the bottom of the NEC
B
A – CPU Bay Cover Screws
A)
as shown in the following figure.
A – Screws
(A)
Disassembly and Reassembly 3-21